Manual

EN 9
AutomaticDemonstration
Automatic Demonstration takes place when "DEMO
MODE" is set to "ON" (factory-preset).
MENU Wheel
Lock Button
Power_
Sub Menu
• Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power _.
Switch is set to "!_" or "_" and no cassette is in
the camcorder. _l_
• Performing any operation during the
demonstration stops the demonstration
temporarily, If no operation is performed for more
than 3 minute after that, the demonstration will _t
resume.
• "DEMO MODE" remains "ON" even if the
camcorder power is turned off. _l_
TocancelAutomaticDemonstration _€
1 SetthePowerSwitchto"@"whilepressingdown
the Lock Button located on the switch.
2 Open the LCD monitor fully, or pull out the
viewfinder fully.
3 Press the MENU Wheel in. The Menu Screen
appears.
4 Rotate the MENU Wheel to select "_1", and
press it. The SYSTEM Menu appears.
5 Rotate the MENU Wheel to select "DEMO
MODE", and press it. The Sub Menu appears.
6 Rotate the MENU Wheel to select "OFF", and
press it.
7 Rotate the MENU Wheel to select "URETURN',
and press it twice. The normal screen appears.
NOTE:
Detach the lens cap to see the actual changes of the
Automatic Demonstration activated on the LCD
monitor or viewfinde_