Manual

8_ EN INDEX Indications (cont.)
Warning Indications
Indications Function
Displays the battery remaining power.
Remaining power level: high _-r_.._3_-._g_t_l
Remaining power levee exhausted I
As the battery power comes close to nil, the battery indicator blinks.
When the battery power is exhausted, power turns off automatically.
r_l Appears when no tape is loaded. (_ pg. 15)
CHECK TAPE'S ERASE Appears when the erase protection tab isset to "SAVE" while the Power Switch is
PROTECTION TAR set to "5" or "[_" and the VIDEO/MEMORY Switch is set to "VIDEO".
(_ pg. 13)
Appears if dirt is detected on the heads during recording. Use an optional
HEAD CLEANING cleaning cassette. (_ pg. 77)
REQUIRED USE
CLEANING CASSETTE
[] Appears if condensation occurs. When this indication is displayed, wait more
CONDENSATION than I hour until condensation disappears.
OPERATION PAUSED
PLEASE WAIT
Appears if a tape is not loaded when the Recording Start/Stop Button or
TAPE! SNAPSHOT Button is pressed white the Power Switch is set to "m" or "@" and
the VIDEO/MEMORY Switch is set to "VIDEO".
TAPE END Appears when the tape ends during recording or playback. (_ pg. 68)
• Appears when the date/time is not set. (_" pg. 14)
SET DATE/TIME[ • Appears when the built-in clock (hthium) battery is discharged and the
previously set date/time is erased. (_ pg. 14)
Appears for 5 seconds after power is turned on if the lens cap is attached.
Appears if Audio Dubbing is attempted on a blank portion of a tape. (_ pg. 59)
LENS CAP
A. DUB ERROR!
A. DUB ERROR!
<CANNOT DUB ON A
LP RECORDED TAPE>
<CANNOT DUB ON A
16bit RECORDING>
<CHECK TAPE'S
ERASE PROTECTION
TAB>
<MEMORY CARD!>
INSERT ERROR!
• Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.
(_ pg. 59)
• Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.
(_ pg. 59)
• Appears flA. DUB (@) on the remote control is pressed when the erase
protection tab is set to "SAVE". (_ pg. 59)
Appears if Insert Editing is attempted on a blank portion of a tape. (_¢ pg. 60)