Manual
72 EN TROUBLESHOOTING(cont.)
Other problems
24. The powerA harge lamp on the 24. • The temperature of the 24. • To protect the battery, it is
camcorder does not light when battery is extremely high/low recommended to charge it in
the charging is attempted. • Charging is difficult in places places with a temperature of
subject to extremely high/ I0_C to 35°C (50°F to 95°F).
low temperatures, g-_"pg. 74)
25. "SET DATE/TIME!" appears. 25. •The built-in clock's 25. •Connectthecamcorder roan
rechargeable lithium battery AC outlet using the AC
is discharged. Adapter for over 24 hours to
• The previously set data/time charge the clock's lithium
is erased, battery. (_ pg. I4)
26. There is no picture. 26. • The camcorder is not getting 26. • Turn the camcorder's power
power, or some other off and on again. (:-_ pg. 13)
malfunction exists.
27. Some functions are not 27. • The Power Switch is set to 27. • Set the Power Switch to "[_'.
available using the MENU "1_!". g-_"pg. 13)
Wheel.
28. Files stored in the memory 28. • Files stored in the memory 28. • Remove protection from the
card cannot be deleted, card are protected, files stored in the memory
card and delete them.
g-_ pg. 27 --28)
29. When the image is printed 29. • This is not a malfunction. 29. • By recording with "DIS"
from the printer, a black bar activated (_ pg. 31, 36) this
appears at the bottom of the can be avoided.
screen.
30. When the camcorder is 30. •The DV cable was plugged/ 30. • Turn the camcorder's power
connected via the DV unplugged with power off and on again, then
connector, the camcorder does turned on. operate it.
not operate.
31. TherearoftheLCDmonitoris 31. -The light used to illuminate 31. -ClosetheLCDmonitorto
hot. the LCD monitor causes it to turn it off or set the Power
become hot. SwiRh to "OFF", and let the
unit cool down.
32. Images on the LCD monitor 32.
appear dark or whitish.
• In places subject to low
temperature, images become
dark due to the
characteristics of the LCD
monitor. When this happens,
the displayed colors differ
from those that are actually
recorded. This is not a defect
of the camcorder.
• When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
32. • Adjust the brightness and
angle of the LCD monitor.
g-_ pg. 12, 13)