Manual
EN71
Advancedfeatures
13. The focus does not adjust 13. • Focus is set to the Manual 13. •SetFocustotheAutomode.
automatically, mode. (_ pg. 45)
• The recording was done in a • Clean the tens and check the
dark place, or the contrast focus again. (_ pg. 77)
was low.
• The lens is dirty or covered
with condensation.
14. In the 5-Second mode, 14. • The 5-Second mode is set to 14. • Set"5S" to "5S" in MANUAL
recording ends before "Anim/' in MANUAL Menu. Menu. (_;_pg. 31, 36)
5 seconds have elapsed.
15. Snapshot mode cannot be 15. •The Squeeze mode 15. • Disengage the Squeeze
used. (SQUEEZE) is selected. (SQUEEZE) mode.
(_ pg. 31, 37)
16. The color of Snapshot looks 16. • The light source or the 16. • Find a white subject and
strange, subject does not include compose your shot so that it
white. Or there are various also appears in the frame.
different light sources behind (_ pg. 23, 42)
the subject. • Disengage the Sepia (SEPIA)
• The Sepia (SEPIA)or and Monotone
Monotone (MONOTONE) (MONOTONE). (_ pg. 3I,
mode is activated. 34)
IZ The image taken using 1Z •Shootingwasperformed 1Z • Press BACK LIGHT.
Snapshot is too dark. under backlit conditions. (_ pg. 47)
1& The image taken using l& • The subject is too bright. 18. • Set "1_" to "SPOTLIGHT".
Snapshot is too bright. (_ pg. 33)
19. White Balance cannot be 19. -The Sepia (SEPIA)or 19. • Disengage the Sepia (SEPIA)
activated. Monotone (MONOTONE) or Monotone (MONOTONE)
mode is activated, mode before setting White
Balance. (_ pg. 34)
20. Wipe/Fader effects do not 2@ -ThePowerSwitchissetto 20. - Set the Power Switch to "[]'.
work. "5". (_ pg. 13)
21. The Black & White Fader does 2/. -The Sepia (SEPIA)or 21. • Disengage the Sepia (SEPIA)
not work. Monotone (MONOTONE) and Monotone
mode is activated. (MONOTONE).
(_ pg. 31, 34)
2Z Program AE with special 22 • The Power Switch is set to 2Z • Set the Power Switch to "_'.
effects does not work. "!11". (_ pg. 13)
23. The image looks like the
shutter speed is too slow.
• When shooting in the dark,
the unit becomes highly
sensitive to light when
"GAIN UP" is set to
"AUTO".
23. • If you want the lighting to
took more natural, set "GAIN
UP" to "AGC" or "OFF".
(_ pg. 31, 35)