Manual

EN6"7
I UsingTheCamcorderAsA
WebCam
This camcorder can be used as a WebCam via USB
connection.
To USB
USBcable l
(provided)
To USB connector
USB-equippedPC
1 Make sure all necessary software(provided) are
installed in your PC and air units are turned off.
2 Connect the camcorder to your PC using the USB
cable.
3 Set the VIDEO/MEMORY Switch to "MEMORY".
4 Set the Power Switch to "1_1"or "_" while
pressing down the Lock Button located on the
swik h.
5 Turn on the PC.
• "I_" appears on the screen.
• ff the PC is not powered on, the camcorder
does not enter the Web Camera mode.
6 When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES."
• It isrecommended to use the AC Adapter as the
power supply instead of the battery pack:
(__ pg. 11)
• Use the provided software PIXELA ImageMixer to
capture video in real time.
• You can also use the camcorder for web
conference bv using Microsoft Winduws _
NetMeetingC_ and signing up fur MSN Hotmail. _4
• In the Web Camera mode, the fullowing buttons
cannot be operated: TITLE, E-MAIL, SNAPSHOT,
INDEX, NAVI, NA VI STORE, the Recording Start/
Stop Button.
Refer to the instruction manuals of the PC and
provided Software.