Manual

EN51
Tomakevideoclipsfrom recordedvideo
footage
1 Load a cassette. 1_:_ pg. 15)
2 Load a memory card. (_:_ pg. 16)
3 Bet the VIDEO!MEMORY Switch to "VIDEO".
4 Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
5 Press I_/11 to start video playback.
6 Press E-MAIL to engage the DMail Clip Record-
Standby mode.
• "E-CLIP" appears.
• To cancel E-Mail Clip Recording, press E-MAIL
again or press • to stop video playback.
7 At the point you want to start dubbing, press the
Recording Start/Stop Butto_ to start DMail Clip
Recording.
8 Press the Recording Start/Stop Butto_ to stop
E-Mail Clip Recording,
• "COMPLETED" is displayed, then the
camcorder re-enters the E-Mail Clip Record-
Standby mode.
9 Press E-MAIL to end DMail Clip Recording. The
normal screen reappears.
To view video clips stored in a memory card...
Refer to "Playback Of Video Clips" (_;_ pg. 25).
To delete unwanted video clips stored in a memo W
card...
Refer to "Deleting Files" (_ pg. 2B).
NOTES:
• Approximate maximum recording time per video
clip is 3 minutes.
• Playback operation cannot be performed during
E_Mail Clip Recording.
• If the end of the tape isreached during E-Mail Clip
Recording, that portion will be automatically
stored in the memory card.
• If the end of the tape is reached in step 6_ the
E-Mail Clip Record-Standby mode will be
automatically cancelled.
• The video clip files str)red with this camcorder are
compatible with MPEG4. Some MPEG4 files
stored with other devices cannot be played back
with this camcorde_
• 240 x I76 size video clip files made with other
devices or video clip files that are longer than 3
minutes cannot be played back with this
camcorder. "UNSUPPORTED FILE!" is displayed.
• The title image playback (TITLE) screen and the
title index screen 1__pg. 25, 26) cannot be used
during E-Mail Clip Recording.
• Video noise may appear while viewing video clips
in the LCD monitor or viewfinder, however, this
noise is not present in the actual video clips stored
in the memory card.
• You can also view video clips on your PC by using
Windows ® Media Player version 6.4 or late_ Refer
to the instructions of PC"and software.