Manual

_8 EN FEATURESFORRECORDING(cont.)
| NAVIGATIONFunction
The Navigation Function helps you check tape
conten/s by making thumbnail images on a memory
card.
MENU Wheel -
Power Switch
Lock Butto
Rewind Button (-_F_)
VIDEO/MEMORY
Switch
NAVI Button
NAVI STORE Button
Fast-Forward Button (1_1_)
Tomakethumbnailimagesduringvideo
recordingautomatically
1 Load a cassette. (_ pg. 15)
2 Load a memory card. (:_ pg. 16)
`3 Set the VIDEO/MEMORY Switch to "VIDEO".
4 Set the Power Switch to "1_" or "_" while
pressing down the Lock Button located on the
switch.
5 Set "NAVIGATION" to the desired navigation
storing time. (_-_pg. 31,35)
• If the ".@." indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is Maded.
6 Press the Recording Start/Stop Button to start
recording.
• When the recording time
is over the navigation
time set in step 5, "[]"
appears briefly, then the
image of the point where
recording is started is
captured and stored in
the memory card as a
thumbnail image.
• if the Recording Start/
Stop button is pressed
before "ml_" stops
blinking, the image of the
point where the loaded memory card is
recognised is captured.
7 Press the Recording Start!Stop Button to stop
recording.
To make thumbnail images after video recording
manually...
1) Perform steps 1 to 4 above.
2) Set "NAViGATiON" to "MANUAL".
( €-pg, 31, 35)
3) After the recording, press NAVI STORE.
• The "[_" indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
captured image is
being stored in the
memory card.
NOTES:
• The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If "REC SELECT" is set to "_12_/_ M"
in DSC Menu, the number shows how many
640 x 480 pixet images can be stored.
• If "5S" is set to "5S" or "Anita." in MANUAL
Menu, the NAVIGATION function will not work
properly.
Tofindscenesontapeusingthumbnailimages
(NAVIGATIONSearch)
1 Load a cassette. (_:_pg, 15)
2 Load a memory card. (_,_pg, 16)
,3 Set the VIDEO/MEMORY swit_ h to "VIDEO".
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
PressNAVI during video playback or stop mode.
• The loaded cassette's
NAVIGATION thumbnail
image screen appears,
• Press _141 to display the
previous page. PressI_
to display the next page.
6 Rotate the MENU Wheel to select the desired
image, and press it.