Manual

EN
• If Program AE with special effects (::_pg. 33) is
engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.
• If SNAPSHOT is pressed when "DIS" is set t_)
"ON" I_::_pg. 36}, the Stabilizer will be disabled.
• During playback as well, all snapshot modes
except Nega mode are available when
'__ _ M COPY" is set t_)"OFF" in VIDEO Menu.
('._ pg. 40) However, the shutter sound is not
heard.
• During Snapshot recording, the image displayed
in the viewfinder may be partially missing.
However, there is no effect in the recorded image.
• When a cable is connected to the AV connector,
the shutter sound is not heard from the speaker,
however it is recorded onto the tape.
MotorDriveMode
Keeping SNAPSHOT pressed in step 5 provides an
effect similar to serial photography. (Interval
between still images: approx. 1 second)
• The Motor Drive mode is disabled when "REC
SELECT" is set to "_.17_1_'. (_ pg. 39)
I Self-Timer
Once the camcorder isset, the camcorder operator
can become part of the scene in a more naturat way,
adding the final touch to a memorable picture.
1 Set the Power Switch to "_" while pressing down
the Lock Button located on the switch.
Open the LCD monitor fuity, or pull out the
viewfinder fully.
• You can tilt the LCD monitor upward to 180 °
so that it faces forward and view yourself while
serf-recording with the viewfinder pushed
back.
Set "SELF-TIMER" to
"ON _.._'.(_,_pg. 31,361
To engage the Self-Timer
for video recording, press
the Recording Start/Stop
Button. ._.
• After 15 seconds, the
beep sounds and video
recording starts.
To stop Self-Timer
recording, press the
Recording Start!Stop
Button again.
• The camcorder re-enters
Record-Standby mode.
OR
PressSNAPSHOT.
• After 15 seconds, the beep sounds and
snapshot recording star/s. After that, the
camcorder re-enters Record-Standby mode.
To end SelgTimer recording, select "OFF" in
step 3.
s
CONTINUED ON NEXT PAGE