Manual

EN41
| SystemMenu
I_] SYSTEM
Each setting is hnked with "_1", which appears
when the Power Switch is set to "_". (;-9 pg. 31 ) The
parameters are the same as in the description on
page 37.
BEEP (Factory-preset: MELODY)
OFF / REEP/ MELODY
TALLY
OFF/ON
REMOTE
OFF/ON
DEMO MODE
OFF/ON
TITLE W/
RACKGRND / IMAGE
PRIORITY
LCD / FINDER
CAM RESET
EXECUTE / RETURN
(Factory-preset: ON)
(Factory preset: ON)
(Factory-preset: ON)
(Factory-preset: BACKGRND)
(Factory-preset: LCD)
| DisplayMenu
I_1 VIDEODISPLAY
The parameters (except "OFF" in ON SCREEN
settings) are the same as in the description on
page 38.
Brightnessadjustmentofthedisplay
BRIGHT
For details, refer to "Brightness Adjustment Of The
Disptay" (_-_pg. 13).
ON SCREEN (Factory-preset: LCD)
OFF / ECD / LCD/TV
When set to "OFF", the camcorder's display
disappears.
DATE/TIME (Factory-preset: OFF)
OFF / AUTO / ON
When set to "AUTO", the date/time are disptayed
in the following cases:
• When playback starts. The camcorder displays
the date/time when scenes are recorded.
• When the date is changed during playback.
TIME CODE (Factory-preset: OFF)
OFF/ON
NOTE:
The date indicatkm can also be turned on/off by
pressing the DISPLAY Button on the remote control
_rovided). (__ pg. 22, 52, 62)
Display
ON SCREEN Settin :
For playback sound, tape
speed and tape running
during vldeo playback-
DATE/TIME Setting:
For date/time.
TIME CODE Setting:
For time code.
Minutes
Seconds
Frames*
* 30 frames = 1 second