Manual

2 EN MENUS FORDETAILEDAD3USTMENT(cont.)
RECORDINGMENUS
i WipeOrFaderEffects
4) Press the MENU Wheel in.
The Menu Screen returns.
• Repeat the procedure if
you wish to set other
function menus.
5) Pressthe MENU Wheel in
again. The Menu Screen
closes.
NOTES:
• The '_" settings are effective when the Power
Switch isset to both '_1" and '_". However, the
menu settings can be changed only when the
Power Switch is set to '_".
• The "_" settings are effective only when the
Power Switch is set to '_".
• The "_?J" functions which are set when the Power
Switch is set to '_" are also applied when the
Power Switch is set to "PLAY".
• The '_" (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
'1_1".However, the menu settings can be changed
only when the Power Switch is set to '_".
• The '_" (CAMERA DISPLAY) settings are
effective only for shooting except "BRIGt lT".
• The '_" (VIDEO DISPLAY) settings are effective
only for video playback except "BRIGHT".
• The date, indication can also be turned on/offby
pressing the DISPLAY Button on the remote
control (provided). 1__"pg. 22, 52, 62)
IMPORTANT:
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(_-_"pg. 33) If an unusable Wipe/Fader Effect is
selected, its indicator blinks in blue or goes out.
These effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
Wipe or Fader works when video recording is started
or stopped.
1 Set the VIDEO/MEMORY Switch to "VIDEO".
2 Set the Power Switch to "_" while pressing down
the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Set "_" to the desired mode. (_ pg. 31 )
TOactivate the Fade-in or Wipe-ln, press FADE/
WIPE during Record-Standby mode.
• The selected effect indicator appears.
To activate the Fade-out or Wipe-out, press
FADE/WIPE during recording.
• The setected effect indicator appears.
6 Press the Recording Start!Stop Button to activate
the Fade-in/out or Wipe-in/out.
TO deactivate the selected effect...
Press FADE/WIPE again in step 6. The effPct
indicator disappears.
NOTE:
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
I_@WIPE/FADER
(Factory-preset: FADER-WHITE)
[] FADER-WHITE: Fade in or out with a white
screen.
[_IFADER-BEACK: Fade in with black
or out a
screen.
B.W FADER-B.W: Fade in to a color screen from a
black and white screen, or fade out from color to
black and white.