Manual

EN 21
ShuttleSearch
Allows high-speed search in either direction during
video playback.
1) During playback, press 1_ for forward seamh,
or _ for reverse seamh.
2) To resume normal playback, press 1_/11.
• During playback, press and hold 1_ or _1_1.
The search continues as long as you hold the
button. Once you release the button, normal
playback resumes.
• A slight mosaic effc-ct appears on the display
during ShuBle Search. This is not a
malfunction.
ATTENTION:
During Shuttle Seamh, parts of
the picture may not be clearly
visible, particularly on the left
side of the screen.
BlankSearch
14elps you find where you should start recording in
the middle of a tape to avoid time code interruption.
(r__pg. 19)
1 Load a cassette. (_a_pg. 15)
2 Set the VIDEO/MEMORY Switch to "VIDEO".
3 Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
4 During Stop mode,
press BLANK
SEARCH.
• The "BLANK
SEARCH"
indication appears
and the camcorder
automatically starts
reverse or forward search, then stops at the
spot which is about 3 seconds of tape before
the beginning of the detected blank portion.
• To cancel Blank Search midway, press i.
NOTES:
• Before starting Blank Search, if the current position
is at a blank portion, the camcorder searches in
the reverse direction. If the current position is at a
recorded portion, the camcorder searches in the
f_)rward direction.
• Blank Search does not work if "HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE" has
appeared with the tape.
• If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
• A blank portion which is shorter than 5 seconds of
tape may not be detected.
• The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
Slow-MotionPlayback
Frame-By-FramePlayback
PlaybackZoom
PlaybackSpecialEffects
Available only with the remote control (provided).
g-_"pg. 58)