Operation Manual

—6—
Master Page: Left
Follow the procedure described below to
install the software. From the [SETUP]
screen in step 2, you can install the
following drivers or software. Quit any other
software you are using. (Check that there
are no other application icons on the status
bar.)
USB Mass Storage Class driver
This driver allows your PC to read and write
memory cards in the camcorder.
Windows
®
Me/2000/XP:
Since there is no need to install this driver,
the item is not displayed. Simply connect
the camcorder to the PC with a USB cable,
and you can read and write memory cards
in the camcorder.
Windows
®
98SE:
Be sure NOT to connect the USB cable
between the camcorder and the PC before
installing the driver.
Digital Photo Navigator 1.0
This application is used to organize still
images and convert them into a variety of
formats.
G.726 decoder
This is an audio decoder for video clips
created by the camcorder (extension “.asf”).
NOTE:
Install G.726 decoder only when the
camcorder is equipped with E-Mail Clip
Recording function.
1 Load the provided CD-ROM into
the PC.
After a moment, the [SETUP] screen
appears.
● From the [SETUP] screen, you can
install the desired driver or software.
● If the [SETUP] screen does not
appear, double-click the CD-ROM
icon in the [My Computer] window.
2 Click [Install] on the right side
of the desired software and
follow the on screen
instructions to complete the
installation.
The installation of the selected driver
or software starts. The procedure
differs depending on the driver or the
software.
Following steps are the example of
Digital Photo Navigator on
Windows
®
98SE.
[License Agreement] screen appears.
Click [Yes].
Then, [Choose Destination Location]
screen appears.
Click [Next].
Then, [Select Program Folder] screen
appears.
Click [Next].
Software Installation
(Windows
®
)
CONTINUED ON NEXT PAGE
M5D2_D5+DSC_glb_InstaGuide.fm Page 6 Monday, October 25, 2004 2:48 PM