Operation Manual

EN 13
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.
How To Attach The Shoulder Strap
1 Peel off the pad
and thread the end
of the strap through
the eyelet.
2 Thread the strap
through the buckle,
adjust its length, and
use the strap guide
to fix it in place.
3 Position the
buckle near the
eyelet and reattach
the pad.
How To Attach The Core Filter
Attach the core filters to the cables. The core
filter reduces interference. When connecting a
cable, attach the end with the core filter to the
camcorder.
1 Release the stoppers on both ends of the
core filter.
2 Run the cable through the core filter.
Close the core filter until it clicks shut.
Open the pad and make grip adjustments.
● Before making the adjustment, remove any
security tags that may be attached to the
velcro.
Place here during
shooting
Eyelet
Strap Guide
Buckle
Grip Adjustment
Stopper
3 cm
Wind once
Core filter
GR-D770EK_GR-D760EK_EN.book Page 13 Thursday, December 14, 2006 4:18 PM