ENGLISH DIGITAL VIDEO CAMERA CONTENTS GR-D90 GR-D70 GR-D30 Please visit our Homepage on the World Wide Web for Digital Video Camera: AUTOMATIC DEMONSTRATION 6 GETTING STARTED 7 – 11 TAPE RECORDING & PLAYBACK 12 – 16 MEMORY CARD RECORDING & PLAYBACK 17 – 22 ADVANCED FEATURES 23 – 37 REFERENCES 38 – 53 http://www.jvc-victor.co.jp/english/cyber/ For Accessories: http://www.jvc-victor.co.jp/english/accessory/ The camcorder illustrations appearing in this instruction manual are of the GR-D90.
CONTENTS SAFETY PRECAUTIONS IMPORTANT PRODUCT SAFETY INSTRUCTIONS PROVIDED ACCESSORIES HOW TO ATTACH THE LENS CAP HOW TO ATTACH THE CORE FILTER AUTOMATIC DEMONSTRATION 3 4 5 5 6 6 GETTING STARTED Power ............................................................ 7 – 8 Grip Adjustment ...................................................... 8 Viewfinder Adjustment ............................................. 8 Shoulder Strap Attachment ......................................... 9 Tripod Mounting ............
Dear Customer, Thank you for purchasing this digital video camera. Before use, please read “SAFETY PRECAUTIONS” and “IMPORTANT PRODUCT SAFETY INSTRUCTIONS” (墌 pgs. 3 and 4) to ensure safe use of this product. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This product has a fluorescent lamp that contains a small amount of mercury. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry.
PROVIDED ACCESSORIES or CD-ROM (GR-D90/D70 only) USB Cable (GR-D90/D70 only) Battery Pack BN-V408U AC Adapter AP-V11U or AP-V13U Lens Cap (See below for attachment) Shoulder Strap Audio/Video Cable (ø3.5 mini-plug to RCA plug) Lithium Battery* CR2025 (GR-D90/D70 only) (for remote control unit) Core Filter (for optional S-Video cable 墌 pg.
HOW TO ATTACH THE CORE FILTER Attach the Core Filter(s) (if provided with your model 墌 pg. 5) to an optional cable(s). The Core Filter reduces interference. 1 2 Stopper Release the stoppers on both ends of the Core Filter. 3 3 cm Wind once Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter. Wind the cable once around the outside of the Core Filter as shown in the illustration. • Wind the cable so that it is not slack.
# Power r y CHARGING THE BATTERY PACK 1 With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount #, then slide up the battery pack until it locks in place. Arrow 2 Set the Power Switch y to “OFF (CHARGE)”. Connect the AC Adapter to the camcorder. 3 Plug the AC Adapter into an AC outlet. The POWER/ CHARGE lamp r on the camcorder blinks to indicate charging has started.
● Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas. ● The following operation stops charging: • Set the Power Switch y to “PLAY”, “ ” or “ ”. • Disconnect the AC Adapter from the camcorder. • Unplug the AC Adapter from the AC outlet. • Detach the battery from the camcorder.
Shoulder Strap Attachment 1 Thread the strap through the eyelet e, then fold it back and thread it through the buckle. Repeat the procedure to attach the other end of the strap to the other eyelet e located under the Grip Strap. Confirm the strap is not twisted. Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT W in the direction of the arrow then pull the cassette holder cover open until it locks.
● It takes a few seconds for the cassette holder to open. Do not apply force. ● There may be a delay after you open the cassette holder cover until the cassette holder opens. Do not use force. ● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again. ● If the tape does not load properly, open the cassette holder cover fully and remove the cassette.
Loading A Memory Card Picture Quality/Image Size Setting (GR-D90/D70 only) (GR-D90/D70 only) The provided memory card (GR-D90 only) is already inserted in the camcorder when you receive the camcorder. The Picture Quality/Image Size can be selected to best match your needs. Refer to the chart on page 18 for your selection. 1 Make sure the camcorder’s power is off. 2 Open the LCD monitor (墌 pg.
Basic Recording % Perform the procedures listed below before continuing. ● Power (墌 pg. 7) ● Grip Adjustment (墌 pg. 8) ● Viewfinder Adjustment (墌 pg. 8) ● Load A Cassette (墌 pg. 9) ● Recording Mode Setting (墌 pg. 10) 1 Remove the lens cap. For GR-D90/D70 Owners: Open the LCD monitor (墌 pg. 47, u Monitor Open Button) and set the VIDEO/DSC Switch 4 to “VIDEO”. w During shooting r 2 Set the Power Switch y to “ 180° ” or “ ” while pressing down the Lock Button t located on the switch.
Journalistic Shooting Zooming In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward). To produce the zoom in/out effect, or an instantaneous change in image magnification. Zoom In Slide the Power Zoom Lever & towards “T”. Zoom Out Slide the Power Zoom Lever & towards “W”.
Time Code Normal Playback During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number. 1 Load a tape (墌 pg. 9).
6 5 7 8 Blank Search % & Helps you find where you should start recording in the middle of a tape to avoid time code interruption (墌 pg. 14). 1 Load a tape (墌 pg. 9). 2 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/ D70 only), then set the Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch. 4 3 Press BLANK SEARCH *. Speaker y NOTES: ● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically.
Connections To AV ( These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown Connector cover* in the illustration. If using a VCR . . . go to step 3. If not . . . go to step 4. To S-VIDEO ) Audio/Video cable (provided) 3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual. 4 Turn on the camcorder, the VCR and the TV.
Basic Shooting (Snapshot) ^ You can use your camcorder as a digital still camera for taking snapshots. Perform the procedures listed below before continuing. ● Power (墌 pg. 7) ● Grip Adjustment (墌 pg. 8) ● Viewfinder Adjustment (墌 pg. 8) ● Loading A Memory Card (墌 pg. 11) ● Picture Quality/Image Size Setting (墌 pg. 11) 4 1 Set the VIDEO/DSC Switch 4 to “DSC”, then set the Power Switch y to “ ” or “ ” while pressing down the Lock Button t located on the switch.
Approximate Number of Storable Images Image Size/ Picture Quality Normal Playback SD Memory Card (optional) 8MB 16MB 32MB 64MB 1024 x 768/ FINE 20 45 95 190 1024 x 768/ STANDARD 65 145 310 605 640 x 480/ FINE 45 95 205 405 640 x 480/ STANDARD 160 295 625 1215 Approximate Number of Storable Images Image Size/ Picture Quality MultiMediaCard 8MB* 16MB** 32MB** 1024 x 768/ FINE 24 48 100 1024 x 768/ STANDARD 75 160 320 640 x 480/ FINE 55 105 215 640 x 480/ STANDARD 190
6 5 Viewing File Information 7 8 & % t You can get the relevant file information by pressing the INFO button 0 during normal playback or Index playback. y Info Screen FOL DER F I LE DA T E S I ZE QUA L I T Y P RO T E C T OFF (CHARGE) PLAY : 1 0 0 J V CGR : DVC 0 0 0 1 0 : MAR 2 7 ’ 0 3 : 1 0 2 4X7 6 8 : F I NE : OF F 4 0! Auto Playback You can run through all the images stored on memory automatically. 1 Perform steps 1 and 2 of “Normal Playback” (墌 pg. 18).
Protecting Files Deleting Files The Protect mode helps prevent the accidental erasure of files. Previously stored files can be deleted either one at a time or all at once. 1 Load a memory card (墌 pg. 11). 2 Set the VIDEO/DSC Switch 4 to “DSC”, then set 1 Load a memory card (墌 pg. 11). 2 Set the VIDEO/DSC Switch 4 to “DSC”, then set the Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch.
Dubbing Still Images Recorded On A Tape To A Memory Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card (墌 pg. 11) and cassette (墌 pg. 9). 2 Set the VIDEO/DSC Switch 4 to “VIDEO”, then set the Power Switch y to “PLAY” while pressing down the Lock Button t. 3 Press the MENU/VOLUME wheel % in. The Menu Screen appears. Rotate it to select “ press it.
5 Select the number of prints by rotating the MENU/ VOLUME wheel % and press it. Repeat steps 3 through 5 for the desired number of prints. • The number of prints can be set up to 15. • To correct the number of prints, select the image again and change the number. 6 Rotate the MENU/VOLUME wheel % to select “RETURN” and press it. Selection is complete. “SAVE?” appears.
NOTES: Night-Alive Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed. 1 Set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch. Open the LCD monitor fully or pull out the viewfinder fully. 2 Press NIGHT 0 so that the Night-Alive indicator “ ” * appears.
Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording. 1 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/ D70 only), then set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch. Open the LCD monitor fully or pull out the viewfinder fully. 2 Press the MENU/VOLUME wheel % in.
Snapshot (For Tape Recording) This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION 1 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/ D70 only), then set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch. Open the LCD monitor fully or pull out the viewfinder fully. 2 Press the MENU/VOLUME wheel % in. The Menu Screen appears. 3 Rotate the MENU/VOLUME wheel % to select “ (CAMERA)”, then press it.
Manual Focus To obtain correct focus. 1 If you are using the viewfinder, you should already have made the necessary viewfinder adjustments (墌 pg. 8). 2 Set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch, then press FOCUS * (墌 pgs. 46 and 47). The manual focus indicator appears. 3 To focus on a farther subject, rotate the MENU/ VOLUME wheel % towards “+”. “ ” o appears and blinks. To focus on a nearer subject, rotate the MENU/ VOLUME wheel % towards “–”.
3 Rotate the MENU/VOLUME wheel % to select Iris Lock Use this function in the following situations: • When shooting a moving subject. • When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away. • When shooting on a reflective natural background such as at the beach or when skiing. • When shooting objects under a spotlight. • When zooming. When the subject is close, keep the iris locked.
WIPE/FADER For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings (墌 pg. 28 – 31). 1 Set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch. Open the LCD monitor fully or pull out the viewfinder fully. 2 Press the MENU/VOLUME wheel % in. The Menu Screen appears. Refer to “Fade/Wipe Effects” (墌 pg. 24). PROGRAM AE Refer to “Program AE With Special Effects” (墌 pg. 23).
GAIN UP OFF: Allows you to shoot dark scenes with no picture brightness adjustment. [AGC]: The overall appearance may be grainy, but the image is bright. : The shutter speed is automatically AUTO adjusted (1/30 — 1/200 sec.). Shooting a subject in low or poor lighting at 1/30 sec. shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. The overall appearance may be grainy. While the shutter speed is being automatically adjusted, “ ” is displayed.
BEEP OFF: Even though not heard while shooting, shutter sound is recorded on the tape. BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. Also to activate the shutter sound effect (墌 pg. 17, 25). [MELODY]: Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect (墌 pg. 17, 25). TALLY OFF: The tally lamp remains off at all times. [ON]: The tally lamp comes on to signal the start of recording.
VIDEO CLOCK ADJ. Allows you to set the current date and time (墌 pg. 10). V I DEO SOUND MOD E – STEREO 12B I T MOD E – SOUND 1 REC MODE – COPY – OF F S / AV I NPUT – OF F DSC (GR-D90/D70 only) DSC QUAL I TY – F I NE I MAGE S I ZE – 1 02 4 X7 6 8 REC SELECT – RETURN RETURN QUALITY , IMAGE SIZE Refer to “Picture Quality/Image Size Setting” (墌 pg. 11). REC SELECT [ ]: When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to “VIDEO”, still images are recorded only onto the tape.
VIDEO DISPLAY • Settings made in the “ VIDEO DISPLAY” Menu are effective only for tape playback. V I DEO BR I GH T ON SCR E E N DA TE / T I ME T I ME COD E D I SPLAY – LCD – OF F – OF F RETURN BRIGHT , DATE/TIME , TIME CODE Refer to “ CAMERA DISPLAY” on page 30, 31. The factory-preset of “DATE/TIME” in the “ VIDEO DISPLAY” Menu is “OFF”. NOTES: • For GR-D90/D70 Owners: You can also use the provided remote control’s AUDIO button T to change the output sound (without having to access the Playback Menu).
Dubbing To Or From A VCR To Use This Camcorder As A Player 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 16. 2 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/ D70 only), then set the camcorder’s Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR. For GR-D90/D70 Owners: To Use This Camcorder As A Recorder 1.
Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from this camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. To Use This Camcorder As A Player 1 Make sure all units are turned off. Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
Make sure “REMOTE” in the SYSTEM Menu is set to “ON” (墌 pg. 30) and the remote control is pointed at the remote sensor 1. The transmitted beam’s approximate effective distance for indoor use is 5m (16ft). Slow-Motion Playback To allow slow-speed search in either direction during tape playback. 1 To change from normal to Slow-Motion Playback, Playback Special Effects To allow you to add creative effects to the playback image. 1 To start playback, press PLAY (4) j.
Audio Dubbing Insert Editing The audio track can be customized only when recorded in the 12-bit mode (墌 pg. 28). You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged. NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
Connection To A Personal Computer [A] Using USB cable (GR-D90/D70 only) [A] Using USB cable (GR-D90/D70 only) [B] Using DV cable y This camcorder can transfer still images to a PC via USB connection. OFF (CHARGE) PLAY 4 [B] Using DV cable It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software. 1 Make sure the camcorder and PC are turned off.
Before consulting your JVC dealer, please check the following to see if you can correct the problem yourself. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes; and then re-connect it and proceed as usual from the beginning. No power is supplied. • The power is not connected properly.
The Black & White Fader does not work. • The Sepia or Monotone mode is activated. ¥ Turn off Sepia and Monotone (墌 pg. 23). Even when Slow Shutter is not selected, the image looks like it is activated. • When shooting in the dark, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow Shutter. ¥ If you want the lighting to look more natural, set GAIN UP to “AGC” or “OFF” in the Menu Screen (墌 pg. 29). White Balance cannot be activated.
A memory card cannot be played back. • The Power Switch y is set to “ ” or “ ”. ¥ Set the Power Switch y to “PLAY” (墌 pg. 18). • The VIDEO/DSC Switch 4 is set to “VIDEO”. ¥ Set the VIDEO/DSC Switch 4 to “DSC”. The LCD monitor image is distorted. • During playback of the unrecorded portion, High-speed Search and still playback, LCD monitor indications appear distorted. This is not a defect. Images on the LCD monitor are jittery. • The speaker volume is too great. ¥ Turn the speaker volume down (墌 pg. 14).
NOTES: AC Adapter When using the AC Adapter in areas other than the USA 䡲 The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V. USING HOUSEHOLD AC PLUG ADAPTER In case of connecting the unit’s power cord to an AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer.
LCD Monitor 1. To prevent damage to the LCD monitor, DO NOT . . . ... push it strongly or apply any shocks. ... place the camcorder with the LCD monitor on the bottom. 2. To prolong service life . . . ... avoid rubbing it with coarse cloth. 3. Be aware of the following phenomena for LCD monitor use. These are not malfunctions: • While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up.
How to handle a CD-ROM • Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion. • Do not use conventional disc cleaners or cleaning spray. • Do not bend the CD-ROM or touch its mirror surface. • Do not store your CD-ROM in a dusty, hot or humid environment.
For GR-D90US and GR-D70US Owners: Declaration of Conformity Model Number Trade Name Responsible party Address : GR-D90US/D70US : JVC : JVC AMERICAS CORP. : 1700 Valley Road Wayne, N. J. 07470 Telephone Number : 973-317–5000 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with Part 15 of FCC Rules.
Digital Still Camera Function (GR-D90/D70 only) Camcorder General Power supply : DC 11.0 V (Using AC Adapter) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 3.4 W LCD monitor on, viewfinder off : Approx. 4.7 W Dimensions (W x H x D) : 76 mm x 94 mm x 143 mm (3" x 3-3/4" x 5-11/16") (GR-D90) 69 mm x 94 mm x 143 mm (2-3/4" x 3-3/4" x 5-11/16") (GR-D70/D30) (with the LCD monitor closed and the viewfinder pushed back in) Weight : Approx. 550 g (1.
Controls, Connectors And Indicators Refer to this diagram while reading the instructions. 1 4 5 6 789 LCD monitor 2 3 Speaker Viewfinder % ^ & * ( 0 ! @ # $ ) q u w Stereo microphone e i o p r t Q OFF (CHARGE) PLAY y W E R T Y U I O P a s d f g h j k l ; A 6 0 9 2 w 4 3 5 e T W EN Remote Control (provided with GR-D90/D70 Only) 46 INDEX 1 GR-D90/70/30US EN 38-56 46 02.11.
1 • Remote Sensor (GR-D90/D70 only) The transmitted beam’s approximate effective distance for indoor use is 5m (16ft). The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting. • Camera Sensor Be careful not to cover this area, a sensor necessary for shooting is built-in here. 2 Grip Strap .................................................... 墌 pg. 8 3 Tally Lamp ........................................
LCD Monitor/Viewfinder Indications During Tape Recording Only 1 2 During Tape Playback p 34 5 6 1h50m Q W E 12 b i t / SOUND 1 L 64 REC 6w 6w BLANK SEARCH SOUND 1 2 b i t ! VOLUME 15 : 55 0 DE C 2 5 ’ 0 3 1 0 : 0 0 AM 116 : 21 : 25 9 Y 8 7 During Memory Card Recording Only (GR-D90/D70 only) @ T R u During Memory Card Playback (GR-D90/D70 only) U # $ %^ I 1024 100 - 0011 15 BR I GHT O During Both Tape And Memory Card Recording e r t y & * ( ) q w 40 x W T PHOTO 3 BR
1 Displays the selected Fade/Wipe effect .... 墌 pg. 24 2 Appears when in the Squeeze or Cinema mode .................................................................. 墌 pg. 29 3 Rotates while the tape is running .............. 墌 pg. 12 4 Displays the recording mode (SP or LP) ... 墌 pg. 10 5 Displays the tape remaining time .............. 墌 pg. 12 6 • “REC” appears during recording • “PAUSE” appears during Record-Standby mode ................................................................ 墌 pg.
WARNING INDICATIONS (high) (exhausted) Displays the battery remaining power level. As the battery power comes close to nil, the battery indicator blinks (battery power warning). When the battery power is exhausted, power turns off automatically. (墌 pg. 9) Appears when no tape is loaded. CHECK TAPE’S ERASE PROTECTION TAB Appears when the erase protection tab is set to “SAVE” while the Power Switch y is set to “ ” or “ ” and the VIDEO/DSC Switch 4 (GR-D90/D70 only) is set to “VIDEO”. (墌 pg.
CARD ERROR! Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted. UNSUPPORTED FILE! Appears if a file in another format is selected. CHECK CARD’S WRITE PROTECTION SWITCH • Appears when you attempt to record on a SD Memory Card with its write/erase protection tab in the “LOCK” position.
A F AC Adapter ................................................... 墌 pg. 7, 8 Fade-In/Out .................................................... 墌 pg. 24 Audio Dubbing ................................................ 墌 pg. 36 Frame-By-Frame Playback ...................... 墌 pg. 14, 35 Analog Input ............................................. 墌 pg. 31, 33 Auto Date ....................................................... 墌 pg. 30 Auto Focus ..................................................... 墌 pg.
P T 墌 pg. 11 Playback Special Effects ................................ 墌 pg. 35 Playback Zoom .............................................. 墌 pg. 35 Power-Linked Operation ................................. 墌 pg. 13 Power Switch Position .................................... 墌 pg. 13 Program AE With Special Effects ................... 墌 pg. 23 Protecting Files .............................................. 墌 pg. 20 Provided Accessories ...................................... 墌 pg.
MEMO 1 GR-D90/70/30US EN 38-56 54 02.11.
MEMO 1 GR-D90/70/30US EN 38-56 55 02.11.
VICTOR COMPANY OF JAPAN, LIMITED COPYRIGHT© 2002 VICTOR COMPANY OF JAPAN, LTD. 1 GR-D90/70/30US EN 38-56_M 56 US 02.11.
