INSTRUCTIONS ENGLISH LYT1080-001A COMPACT VHS CAMCORDER GR-AXM246 UC Printed in Malaysia 1102-DY-YL-PJ COPYRIGHT© 2002 VICTOR COMPANY OF JAPAN, LTD Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read “PRECAUTIONS” ( pg. 3, 4) to ensure safe use of this product. AUTOMATIC DEMONSTRATION Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).
PROVIDED ACCESSORIES • AC Adapter • Cassette Adapter C-P7U AP-V13U or AP-V11U • Shoulder Strap • Lens Cap • Battery Pack BN-V11U • AA (R6) Battery (for Cassette Adapter) NOTE: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
PRECAUTIONS SAFETY PRECAUTIONS CAUTIONS CAUTION • This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. • Use the JVC BN-V11U/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter.
The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area.
INDEX A P AC Adapter ................................................................. pg. 6 Animation Recording ................................................ pg. 21 Auto Date Record .................................................... pg. 20 Auto Focus ............................................................... pg. 12 Auto Shut Off ........................................................... pg. 11 Picture Stabilizer ...................................................... pg. 18 Playback ..........
GETTING STARTED USING THE BATTERY PACK Perform step 1) of “CHARGING THE BATTERY PACK”. Hook on. Approximate recording time (unit: min.) Viewfinder on LCD monitor on BN-V11U 85 75 BN-V12U (optional) 85 75 BN-V20U (optional) 140 125 BN-V400U (optional) 330 300 Battery pack Push in. BATTERY RELEASE Switch Power Switch USING AC POWER Battery pack Connect the AC Adapter to the camcorder ( step 2) and 3) of “CHARGING THE BATTERY PACK”).
STORE BATTERY: Date/Time Settings Be sure to fully discharge a battery pack by performing the following step storing it for a long period of time, otherwise the battery performance will be reduced. 1) Attach the battery to the camcorder with no cassette inserted. 2) Set the Power Switch ! to “ ” or “ ” while pressing down the Lock Button 0 located on the switch. 1) Set the Power Switch ! to “ ” while pressing down the Lock Button 0 located on the switch. 2) Press the MENU Wheel 1 in.
Grip Adjustment Tripod Mounting 1) Separate the Velcro strip. 2) Pass your right hand through the loop and grasp the grip. 3) Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button 9 and Power Zoom Lever 3. Refasten the Velcro strip. Align the screw and camera direction stud on the tripod with the tripod mounting socket o. Then tighten the screw. CAUTION When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder.
CONTROLS, CONNECTORS AND INDICATORS Eyepiece 1 2 3 4 Refer to this diagram while reading the instructions. During shooting @ # $% ^ & Keep the lens cap attached to the camcorder. 5 6 7 * ( ) q w Cassette holder 89 0 ! Viewfinder e 90° 180° y Speaker Turn the gear to take up slack.
1 • MENU Wheel [–, +] ................................ pg. 18 • BRIGHT Wheel [–, +] .............................. pg. 11 • Speaker Volume Control [VOL.] ............. pg. 11 • TRACKING Wheel [–, +] ........................ pg. 14 2 5-Second Recording Button [5 SEC. REC] ........................................... pg. 12 3 Power Zoom Lever [T/W] ......................... pg. 13 4 • Manual Focus Button [ FOCUS] ........ pg. 12 • Time Base Corrector Button [TBC] ........ pg.
RECORDING PLAYBACK Set REC MODE, TAPE LENGTH and DATE/TIME in SYSTEM MENU. ( pg. 18 – 22, “MENU SETTINGS”) 1 1 Remove the lens cap. Set the Power Switch ! to “ ” or “ ” while pressing down the Lock Button 0 located on the switch. Shooting while using the viewfinder: Make sure the LCD monitor is closed and locked. Shooting while using the LCD monitor: Make sure the LCD monitor is fully open. The camcorder enters the Record-Standby mode and “PAUSE” k is displayed.
BASIC FEATURES Backlight Compensation 5Sec. Rec (5-sec. Recording) To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programmes. 1) Make sure the recording mode is set to “SP”. 2) During Record–Standby, press 5SEC. REC 2. 5S a appears and 5Sec. Rec is reserved. 3) Press the Recording Start/Stop Button 9. Recording starts, and after 5-second recording is finished, the camcorder re-enters the Record– Standby mode automatically. 4) To cancel the 5Sec. Rec.
Zooming Quick Review To produce the zoom in/out effect. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom. • Slide the Power Zoom Lever 3 towards “T” to zoom in, or “W” to zoom out. • The further you slide the Power Zoom Lever 3, the quicker the zoom action. • Focusing may become unstable during Zooming. In this case, set the zoom while in Record– Standby, lock the focus by using the manual focus ( pg.
Tracking Counter Memory Eliminates noise bars that appear on-screen during playback. To activate Manual Tracking: 1) Press the TRACKING Wheel 1 for approx. 2 seconds. “MT” F appears. 2) Rotate the TRACKING Wheel 1 so that the noise bars disappear. • To return to Auto Tracking, press the TRACKING Wheel 1 for approx. 2 seconds or set the Power Switch ! to “OFF” and then “PLAY” again. “AT” F blinks. When Auto Tracking finishes, the indication disappears.
Connections To A TV/VCR Tape Dubbing 1) Make sure all units are turned off. 2) Connect the camcorder to a TV or VCR using the optional video and audio cables. If using both TV and VCR, connect the VCR output to the TV input. 3) Turn on all units. Set the VCR to its AUX input mode, and set the TV to its VIDEO mode. • Use the AC Adapter as the power supply. • Be sure to adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
Using The Cassette Adapter Use this to play back an VHS-C video cassette recorded with this camcorder on a VHS VCR. 1) Slide the battery cover up to remove it, install one “AA (R6)” size battery, then reattach the cover. 2) Slide the latch to open the compartment door, then insert the cassette and close the compartment door. 3) Load the cassette adapter into the VCR and play the tape back. 4) Slide the latch and the compartment door opens automatically. This may take around 10 seconds.
INSTRUCTIONS Eyepiece 1 2 3 4 Refer to this diagram while reading the instructions. During shooting @ # $% ^ & Keep the lens cap attached to the camcorder. 5 6 7 * ( ) q w Cassette holder 89 0 ! Viewfinder e 90° 180° y Speaker Turn the gear to take up slack.
MENU SETTINGS CAMERA MENU EXPOSURE 1 Set the Power Switch ! to “ ” while pressing down the Lock Button 0 located on the switch. 2 Press the MENU Wheel 1 in. The Menu Screen appears. Rotate the MENU Wheel 1 to select the desired function. • To go from CAMERA MENU to SYSTEM MENU, rotate the MENU Wheel 1 to select “4TO SYSTEM MENU” and press it. SYSTEM MENU is composed of 2 pages. To go to the next page, rotate the MENU Wheel 1 to select “4NEXT” and press it.
M.W.B. If the white balance is correct, all other colours will be accurately reproduced. AUTO : White balance is adjusted automatically. FINE : Outdoors on a sunny day. CLOUD : Outdoors on a cloudy day. HALOGEN : A video light or similar type of lighting is used. MWB: White balance is set manually. Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen. If it is difficult to focus on the white paper, adjust focus manually ( pg.
TAPE LENGTH SYSTEM MENU This Menu Screen cannot be accessed while recording. Allows you to set the tape length depending on the tape used: T20=20 minutes, T30=30 minutes, T35=35 minutes, T40=40 minutes. • Tape remaining time p is correct only if the correct tape length has been selected. REC MODE Allows you to set the recording mode. “EP” (Extended Play) is more economical, providing three times the recording time.
OSD OUTPUT ON: On-screen indications are displayed. OFF: On-screen indications are turned off except Date/Time, Instant Title and Warning Indication. REC TIME You can shoot a series of pictures, each slightly different, of the same object for a brief selected period of time (Animation). REC MODE should be set to “SP”. Select the desired recording time and press the Recording Start/Stop Button 9 after focusing on the subject. • Fade- or wipe-in/out cannot be performed.
DEMO MODE Demonstrates certain functions automatically. Available when the Power Switch ! is set to “ ” or “ ” and “DEMO MODE” is set to “ON” (factorypreset). Performing any operation during the demonstration stops the demonstration temporarily. Set to OFF to stop completely. • When a tape whose erase protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.
ADVANCED FEATURES FADER: Fades in/out to a black screen. MOSAIC (Fader): Gradually turns/returns the picture into/from a mosaic pattern. Fade/Wipe Effects Fade- or wipe-in works at recording start, and fadeor wipe-out works at recording end. 1) Set the Power Switch ! to “ ” while pressing down the Lock Button 0 located on the switch. 2) Press FADE/WIPE ) repeatedly until the desired mode appears. 3) Press the Recording Start/Stop Button 9 to activate fade-in/out or wipe-in/out.
Programme AE With Special Effects 1) Set the Power Switch ! to “ ” while pressing down the Lock Button 0 located on the switch. 2) Press P.AE $ repeatedly until the desired mode appears. • To cancel the effect, press P.AE $ repeatedly until “OFF” appears. • Only one mode can be engaged at a time. • In the “High Speed Shutter” or “Sports” modes, picture colour may be adversely affected if the subject is lit by alternating discharge-type light sources such as flourescent or mercury-vapour lights.
TROUBLESHOOTING Before consulting your JVC dealer, please check the following to see if you can correct the problem yourself. Vertical white lines appear when shooting a very bright object. • This sometimes occurs when the contrast between the back-ground and the object is great. It is not a defect of the camcorder. Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder. • Sunlight is directly entering the lens. This is not a defect of the camcorder.
CAUTIONS When using the AC Adapter in areas other than the USA • The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V. • It is normal for the battery pack to be warm after charging, or after use. Temperature Range Specifications Charging ................ 10°C to 35°C (50°F to 95°F) Operation ............... 0°C to 40°C (32°F to 104°F) Storage .................. –10°C to 30°C (140°F to 86°F) • Recharging time is based on room temperature of 20°C (68°F).
4. To protect the unit, DO NOT . . . .... allow it to become wet. .... drop the unit or strike it against hard objects. .... subject it to shock or excessive vibration during transportation. .... keep the lens directed at extremely bright objects for long periods. .... direct the eyepiece of the viewfinder at the sun. .... carry it by holding the viewfinder or the LCD monitor. Be sure to hold the main unit with both hands or use the grip. .... swing it excessively when using the shoulder strap.
SPECIFICATIONS Viewfinder Camcorder General Format Power source : VHS NTSC standard : DC 11 V (Using AC Adapter) DC 6 V (Using battery pack) Power consumption Viewfinder on : 4.3 W LCD monitor on : 4.8 W Signal system : NTSC-type Video recording system Luminance : FM recording Color : Converted sub-carrier direct recording Conforms to VHS standard Cassette : cassette Tape speed SP : 33.35 mm/sec. (1-5/16 ips) EP : 11.12 mm/sec. (7/16 ips) Recording time (max.
