ENGLISH РУCCKИЙ CD RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-S847 For installation and connections, refer to the separate manual. Указания по установке и выполнению соединений приводятся в отдельной инструкции.
ENGLISH Position And Reproduction Of Labels Bottom panel of the main unit CAUTION: Invisible laser radiation when open and interlock failedor defeated. AVOID DIRECT EXPOSURE TO BEAM. (e) ADVARSEL: Usynlig laser stråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgåudsættelse for stråling. (d) VARNING: Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen. (s) VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit ............................... How to use the M (MODE) button ............. 2 3 LOCATION OF THE BUTTONS ............ 4 Control panel ............................................. 4 BASIC OPERATIONS ....................... 5 Turning on the power ................................
LOCATION OF THE BUTTONS ENGLISH Control panel Display window ; a s d f z 1 9 p q w e r t y jk l / h x 2 3 q 1 2 3 4 5 6 7 8 g 4 w c 5 67 e (standby/on/attenuator) button SEL (select) button Control dial Display window Loading slot 4 /¢ buttons FM/AM button 5 (up) button +10 button 0 (eject) button ∞ (down) button –10 button DISP (display) button • Also functions as SSM buttons when pressed together with M (MODE) button.
ENGLISH BASIC OPERATIONS 1 2 3 Turning on the power 1 4 Adjust the sound as you want. (See pages 21 and 22.) Turn on the power. To drop the volume in a moment Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
ENGLISH 4 Setting the clock 1 2 Finish the setting. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 23.) To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, the display changes as follows: Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour.
ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 To stop searching before a station is received, press the same button you have pressed for searching. Searching a station manually: Manual search 1 Select the band (FM 1 – 3, AM). Each time you press the button, the band changes as follows: Select the band (FM 1 – 3, AM).
ENGLISH 3 Tune in to a station you want while “M” (manual) is flashing. To tune in to stations of higher frequencies To tune in to stations of lower frequencies • If you release your finger from the button, the manual mode will automatically turns off after 5 seconds. • If you hold down the button, the frequency keeps changing—in 50 kHz intervals (87.5 MHz – 108.0 MHz for FM 1 and FM 2), in 30 kHz intervals (65.00 MHz – 74.00 MHz for FM 3) and 9 kHz for AM —MW/LW until you release the button.
You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1). Each time you press the button, the band changes as follows: FM1 2 FM2 FM3 AM Tune in to a station (in this example, of 88.3 MHz). Notes: • A previously preset station is erased when a new station is stored in the same preset number.
ENGLISH CD OPERATIONS Refer to “MP3 OPERATIONS” on pages 16 to 20 for operating MP3 discs. All tracks will be played repeatedly until you stop playback. Playing a CD Note: When a CD is inserted upside down, “EJECT” and the CD–in indicator flash on the display and the CD automatically ejects. Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback automatically.
To go to a track quickly (+10 and –10 buttons) 1 Press M (MODE) to enter the functions mode while playing a CD. To fast-forward or reverse the track Press and hold ¢ , while playing a CD, to fastforward the track. ENGLISH Locating a track or a particular portion on a CD 2 Press +10 or –10. To skip 10 tracks* forwards to the last track Press and hold 4 , while playing a CD, to reverse the track.
ENGLISH Selecting CD playback modes To play back tracks at random (Disc Random Play) To play back tracks repeatedly (Track Repeat Play) You can play back the current track repeatedly. 1 Press M (MODE) to enter the You can play back all tracks on the CD at random. 1 Press M (MODE) to enter the functions mode while playing a CD. 2 Press RND (random), while still in the functions mode, so that “DISC RND” appears on the display.
Prohibiting disc ejection In a CD Text, some information about the disc (its disc title, performer, and track title) is recorded. This CD Text information will be shown automatically when you play a CD Text. You can prohibit disc ejection and can lock a disc in the loading slot. ENGLISH Playing a CD Text While pressing CD, press and hold 0 for more than 2 seconds. To change the CD Text information manually, select text display mode while playing a CD Text.
ENGLISH MP3 INTRODUCTION What is MP3? Precautions when recording MP3 files on a CD-R or CD-RW MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can. * Bit rate is the average number of bits that one second of audio data will consume. The unit used is Kbps (1024 bits/second).
01 02 04 03 05 10 5 6 09 11 20 06 7 Level 6 01 08 1 2 3 4 Level 4 Level 3 Level 2 ROOT Level 5 Hierarchy ROOT ENGLISH Level 1 MP3 folder/file configuration 8 9 12 21 07 22 13 14 15 16 17 23 24 18 19 : Root : Folders : MP3 files Note: There is no limit on the number of the hierarchy levels (nested folders). However, up to 8 hierarchy levels is recommended for stable operations.
ENGLISH MP3 OPERATIONS Refer also to “CD OPERATIONS” on pages 10 to 13. All files will be played repeatedly until you stop playback. Playing an MP3 disc Notes: • MP3 discs require a longer readout time. (It differs due to the complexity of the folder/file configuration.) • When playback starts, folder and file names (or ID3 tags) will automatically appears. (See also page 17.) • If you change the source or turn the power off, disc playback stops (without ejecting the disc).
While playing back an MP3 file, you can change the MP3 disc information shown on the display.
ENGLISH Locating a file or a particular portion on an MP3 disc For “MP3 playback/search order” see page 15. To go to a particular file quickly within the current folder (+10 and –10 buttons) 1 Press M (MODE) to enter the functions mode while playing an MP3 disc. To fast-forward or reverse the file Press and hold ¢ while playing an MP3 disc, to fast-forward the file. 2 Press +10 or –10. Press and hold 4 while playing an MP3 disc, to reverse the file.
IMPORTANT: To directly select the folders using the number button(s), it is required that folders are assigned 2 digit numbers at the beginning of their folder names. (This can only be done during the recording of CD-Rs or CD-RWs.) Ex.: If folder name is “01 ABC” = Press 1 to go to Folder 01 ABC. If folder name is “1 ABC,” pressing 1 does not work. If folder name is “12 ABC” = Press and hold 6 (12) to go to Folder 12 ABC.
ENGLISH Selecting MP3 playback modes To play back files at random (Folder Random/Disc Random Play) To play back files repeatedly (Track Repeat/Folder Repeat Play) You can play back the current file or all the files in the current folder repeatedly. You can play back all files of the current folder or all files on the MP3 disc at random. 1 Press M (MODE) to enter the functions mode while playing an MP3 disc. 1 Press M (MODE) to enter the functions mode while playing an MP3 disc.
Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. Select the sound mode you want. When you press the button once, the last selected sound mode is recalled and applied to the current source. Ex.
ENGLISH Adjusting the sound 2 Adjust the setting. You can adjust the sound characteristics to your preference. To increase the level or turn on the loudness 1 To decrease the level or turn off the loudness Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: BAS TRE (bass) (treble) BAS*1 FAD (fader) VOL LOUD BAL (volume) (loudness) (balance) Indication To do: Equalization pattern changes as you adjust the bass or treble. Ex.
OTHER MAIN FUNCTIONS 3 Adjust the PSM item selected. ENGLISH Changing the general settings (PSM) You can change the items listed in the table below by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 2 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See the table below.) 4 5 Repeat steps 2 and 3 to adjust the other PSM items if necessary. Finish the setting. Select the PSM item you want to adjust. (See the table below.
ENGLISH To select the level meter—LEVEL To turn the tag display on or off—TAG DISP You can select the level display according to your preference. When shipped from the factory, “AUDIO 2” is selected. An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded. There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). This unit is compatible only with ID3v1. When shipped from the factory, “TAG ON” is selected.
You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Attaching the control panel 1 Insert the left side of the control panel into the groove on the panel holder. ENGLISH Detaching the control panel Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 2 3 Unlock the control panel.
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes • Sound cannot be heard from the speakers. Disc Playback FM/AM General ENGLISH TROUBLESHOOTING Remedies The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc.
• Disc cannot be played back. No MP3 files are recorded on the disc. Change the disc. MP3 files do not have the extension code—mp3 in their file names. Add the extension code —mp3 to their file names. MP3 files are not recorded in the format compliant with ISO 9660 Level 1, Level 2, or Joliet. Change the disc. (Record MP3 files using a compliant application.) • Noise is generated. The file played back is not an MP3 file (although it has the extension code—mp3).
ENGLISH MAINTENANCE Handling discs When playing a CD-R or CD-RW This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-RWs (Rewritable), and CD Texts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc Center holder from its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface.
AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплуатации? Пожалуйста, перезагрузите Ваше устройство Для получения информации о перезагрузке Вашего устройства обратитесь на соответствующую страницу V J EN, RU C © 2003 VICTOR COMPANY OF JAPAN, LIMITED Cover001AKD-S847[EE]f.
KD-S847 Installation/Connection Manual Руководство по установке/подключению GET0137-002A V J [EE] C 0203KKSMDTJEIN EN, RU РУССКИЙ ENGLISH • This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. • Это устройство разработано для эксплуатации на 12 В постоянного напряжения с минусом на массе. INSTALLATION (IN-DASH MOUNTING) УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ) • The following illustration shows a typical installation.
• When using the optional stay • При использовании дополнительной стойки • When installing the unit without using the sleeve • При установке устройства без использования муфты Washer Шайба Fire wall Стена Stay (option) Стойка (дополнительно) In a Toyota for example, first remove the car radio and install the unit in its place. В автомобилях “Toyota”, например, сначала удалите автомобильную магнитолу, затем установите на ее место это устройство.
РУССКИЙ ENGLISH ELECTRICAL CONNECTIONS ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. If you are not sure how to install this unit correctly, have it installed by a qualified technician. Для предотвращения коротких замыканий мы рекомендуем Вам отсоединить отрицательный разъем аккумулятора и осуществить все подключения перед установкой устройства.
PRECAUTIONS on power supply and speaker connections: ПРЕДОСТЕРЕЖЕНИЯ по питанию и подключению громкоговорителей: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. • Connect the black lead (ground), yellow lead (to car battery, constant 12 V), and red lead (to an accessory terminal) correctly. • BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.
