User's Manual
Table Of Contents
- Safety Precautions
- Model Differences
- Precautions on Playing Back 3D Images (for GZ-HM960)
- Verifying the Accessories
- Names of Parts and Functions
- Names of Buttons and Functions on the LCD Monitor
- Using the Touch Screen
- Getting Started
- Recording
- Playback
- Copying
- Further Information
- LYT2313-001A-M_SP_web.pdf
- Precauciones de seguridad
- Diferencias del modelo
- Precauciones sobre la reproducción de imágenes en 3D (para GZ-HM960)
- Comprobación de los accesorios
- Nombres de piezas y funciones
- Nombres de los botones y funciones en el monitor LCD
- Utilizar la pantalla táctil
- Introducción
- Grabación
- Reproducción
- Copia
- Más información
- LYT2313-001A-M_FR_web.pdf
- Précautions de sécurité
- Différences des modèles
- Précautions pour la lecture d’images 3D (pour GZ-HM960)
- Vérifier les accessoires
- Noms des pièces et des fonctions
- Noms des touches et fonctions sur l’écran LCD
- Utiliser l’écran tactile
- Démarrer
- Enregistrement
- Lecture
- Copier
- Informations supplémentaires
Troubleshooting
If you encounter problems with this unit, check the following before requesting service.
1 Refer to “Trouble” below.
2 Refer to the “Troubleshooting” section in the “Detailed User Guide”.
If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed
User Guide”.
0
http://manual.jvc.co.jp/index.html/
3 Refer to the FAQ of new products on JVC’s website.
0
http://www.jvc.com/
4 This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
In such a case, reset the unit.
A
Turn off the power. (Close the LCD monitor.)
B
Remove the AC adapter and battery pack from this unit, reattach them, open
the LCD monitor and this unit powers on automatically.
5 If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
Trouble
Trouble
Action Page
Power
POWER/CHARGE
lamp starts blinking
when the monitor is
closed.
0
The battery pack is being charged.
10
Recording
Recording cannot be
performed.
0
Check the A / B button.
15
0
Set to the recording mode by tapping
the q button.
18
Recording stops
automatically.
0
Turn off this unit, wait for a while, and
turn it on again. (This unit stops
automatically to protect the circuit when
the temperature rises.)
-
0
Recording stops automatically after 12
hours of continuous recording.
-
Playback
Sound or video is
interrupted.
0
Sometimes playback is interrupted at
the connecting section between two
scenes. This is not a malfunction.
-
34
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/