User Manual

Rear view
DC 12V IN: Connect with DC12V 4-pin XLR power adapter.
TALLY Light: Red, Green and Yellow 3-color TALLY indicator
Battery mount:
Connect with JVC battery BN-VF823 or SWIT battery BN-S8823 to power the monitor.
HDSDI IN1/2: HD/SD-SDI input (BNC connector)
HDSDI OUT: HDMI converted to SDI output (BNC connector)
HDSDI LOOP1/2: HD/SD-SDI loop through output (BNC connector)
VIDEO IN: Composite video input (BNC connector)
TALLY controlling port (RJ45): terminal description is as follows:
The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting.
The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
The YELLOW light is on when connecting the terminal “Y” with “GND”, and goes out when disconnecting
HDMI: HDMI input
Input formats
Terminal 1 2 3 4 5 6 7 8
Description Y G GND R
Input Supported formats
CVBS PAL / NTSC
480I / 576I / 480P / 576P
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
HDMI
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
SMPTE-274M
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M 720p (60 / 59.94 / 50)
SMPTE-125M 480i (59.94)
SDI
ITU-R BT.656 576i (50)