User Manual

ManualsBrandsJVC ManualsMonitorsProHD 23.8" Broadcast Studio LCD Monitor

Item

Exit

To do

Return Main Menu

Display setting

Focus Assist setting

Display setting

R/G/B/Mono setting

Display setting

Display

Waveform

Audio Bar

Vector

Zebra

Focus Assist

Time Code

Histogram

False Color

AFD

H/V Delay

R/G/B/Mono

Color Bar

Marker

UMD

、On

、Blue、Red

、Blue Only、Red Only、Green Only、Mono

Setting value

System

Item

Exit

Aspect Ratio

Scan Mode

Zoom Mode

Odd/Even Frame

Green Mode*3

Idle Duration

Update Driver*4

Update Kernel*5

To do

Return Main Menu

Aspect Ratio setting

Scan Mode setting

Zoom Mode setting

Flip Mode setting

Odd/Even Mode setting

Display setting

Loading Factory settings and User presets

Default: Recover all settings to factory setting

User 1/2/3: Load the User settings 1/2/3

Save current User settings

User 1/2/3: Save the current settings to User 1/2/3

Settings for auto-scan input signals when switch on the monitor

On: Automatically scan

Settings to display Switch on logo or not

Display settings when in Energy Save mode

Set an idle time to enter Energy Save mode

Setting value

16:9、4:3

Normal

Oﬀ、Odd Mode、Even Mode

Oﬀ、H Flip、V Flip、H/V Flip

Factory、User1、User2、User3

、OverScan、Native

、Zoom1、Zoom2

Freeze Frame

Flip Mode

Source Scan*1

Logo*2

、On

User1、User2、User3

On、

、30Sec、2Hours、4Hours

No、Yes

*1 Source Scan

When set to “Yes”, next time switch on the monitor, the monitor will automatically scan the available signal source with the sequence

of “SDI1→SDI2→HDMI→YPbPr→VGA→CVBS”.

*2 Logo

When powered on, the screen will display ProHD logo.

*3 Green Mode

When no recognized signal is detected and opreation time reaches the time selected in “Idle Duration”, the monitor will turn to green

energy saving mode: “Green mode”.

Under standby, Gray Backlight, Blacklight mode, press any button on the front panel, the monitor will be back to normal status.

ABCDEF

Oﬀ（normal）

H Flip

V Flip H/V Flip

Black Backlight、Standby、Gray Backlight