Manual

Changing the initial settings
3 To changethe "COUNTORYCODE"or
"LEVEL", press ENTERto bring up the
associatedpull-down menuwhile _ points
the appropriateitem.
To select the item to be set, use A/v when no pull-
down menu is shown.
4 UseA/v to selecta desiredoption and press
ENTER.
Note that if you change the country code, you must
reselect the Parental Lock level.
5 While _ points [PASSWORD],entera4-digit
passwordusingthe numericbuttons(0 to 9).
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password as in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
6 PressENTER.
moves to [EXIT].
Pressing ENTER again returns to the "OTHERS"
page of the preference display.
NOTES
• If you enter the wrong password more than 3 times in
step 2 above, [_3 moves to [EXIT] automatically and
A/v does not work.
• If you forget your password in step 2
Enter "8888." The current password is deleted and you
can set a new password.
Available :
When you set the parental level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the Parental Lock to be temporarily released or
not.
ENTER_
G C_.3 C_3
C_3 C_3 C_3
5d_Sd
C3_P_
ii, ,_ iiii iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiii
Numeric
buttons
A/V
Usethe A/v to move _ to [TEMPORARY
RELEASE],then press ENTER.
[_moves to the [PASSWORD].
When selecting [NOT RELEASE], press A (OPEN/
CLOSE) to remove the disc.
2 Enteryour 4-digit password using the numeric
buttons (0 to 9).
The Parental Lock is released, and the unit starts
playback.
If you enter the wrong password, "WRONG!
RETRY..." appears on the TV screen.
Enter the correct password.
NOTE
• Whenyou enterthe wrong password morethan 3 times
in step 2 above, 1_3moves to [NOT RELEASE]
automatically and A/v do not work.
55