Manual

Basic operations
We recommend you to set the display language, TV monitor type and digital output before using the unit, depending on
circumstances, by following the procedure below.
See "Changing the initial settings" on and after page 47 for details about each setting item.
ENTER
CHOICE --
iiii ii
T_,_ TW MUTING
_ _ dj°_i!5
,cJ cJ cJj
PressCHOICEfor a few secondsto bring up
the first page of the DVD PLAYERSET UP
display.
The pull-down menu of the "ON SCREEN
LANGUAGE" is already open.
5 Press ENTER.
The third (final) page is shown, in which the pull-
down menu of the "DIGITAL AUDIO OUTPUT" is
already open.
2
3
ON SCREEN LANGUAGE selection
UseA/v to selecta desired language.
You can select the on-screen language for the
preference displays, etc. from among English,
Spanish and French.
Press ENTER.
The second page is shown, in which the pull-down
menu of the "MONITOR TYPE" is already open.
MONITOR TYPE selection
4 Use A/v to select a desired monitor type.
You can select the monitor type according to your TV.
• For the normal (conventional) TV, select "4:3 LB"
or "4:3 PS".
• For the wide-screen TV, select "16:9 AUTO" or
"16:9 NORMAL".
See page 49 for details about each mode.
DIGITAL AUDIO OUTPUT selection
6 Use A/v to select a desired digital output
signal type.
You must set this item correctly when you connect
the unit to an external surround decoder or D/A
convertor (including an amplifier/receiver with
built-in surround decoder or D/A convertor).
(If you do not connect the unit to such a device, you
do not have to set this item.)
• When connecting with a Dolby Digital decoder,
select "DOLBY DIGITAL/PCM".
• When connecting with a DTS or MPEG
Multichannel decoder, select "STREAM/PCM".
• When connecting with other digital device, select
"PCM ONLY".
See page 50 for details.
7 Press ENTER.
The TV screen returns to show the opening display.
NOTES
• This setting may not be necessary except when turning
on the power after purchasing the unit.
• You can also set these items, as well as other
preferences, by pressing CHOICE briefly to bring up the
preference display. See "Changing the initial settings"
on and after page 47 for details.
13