Manual

Creating RealisticSound Fields
Available Sun'ound ]nodes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker intbrmation correctly (see pages 12 to 14).
If only front speakers are connected, you cannot use any Surround modes.
If rear speakers are not connected, you cannot use tile DAP modes and All Channel Stereo.
Speaker Layout
When the center and rear speakers
are connected (5 channels):
:_Nake;
When the rear speakers are connected
(4 channels):
Re ; Re ;
When the center speaker is connected
(3 channels):
Available Surround modes
Each time you press SURROUND ON/Of:F, Surround modes turn on or off.
SURROUND ONIOFF
(Remote) (Front panel)
one PL II I'lUSIE
Ex.: "PL II MUSIC" has been selected.
Each time you press SURROUND MODE, Surround modes change as follows:
Notes:
When the digital multichannel software such as Dolby Digital or DTS Digital
Surround is played back, the appropriate multichannel Surround mode is
automatically activated ("DOLBY DIGITAL" or "DTS SURROUND") by pressing
SURROUND ON/OFF (with the digital input mode selected).
For Dolby Digital 2 ch software, you need to select "PLI! MUSIC" or "PLII MOVIE"
by pressing SURROUND MODE.
For more details, see the table on page 19.
Each time you press SURROUND ON/OFF, Surround modes turn on or off.
Di_AalUm []
PI " _, ,c.r r
II I IU _1 =L L-
SURROUND ON/OFF
(Remote) (Front panel)
Ex.: "PL II MUSIC" has been selected.
Each time you press SURROUND MODE, Surround modes change as follows:
_K
UNEA__M []
PL II I'IUSIE
SUR_0UND SURROUND MODE
(Remote) (Front panel)
Notes:
When the digital multichannel software such as Dolby Digital or DTS Digital
Surround is played back, the appropriate multichannel Surround mode is
automatically activated ("DOLBY DIGITAL" or "DTS SURROUND') by pressing
SURROUND ON/OFF (with the digital input mode selected).
For Dolby Digital 2 ch software, you need to select "PLI! MUSIC" or "PLII MOVIE"
by pressing SURROUND MODE.
For more details, see the table on page 19.
20