Manual

Once you have adjusted the 3D-PHONIC modes, the adjustment is
memorized for each 3D-PHONIC mode.
Betbre you start, remember...
• Make sure that you have set the speaker intbrmation correctly
(see page 12).
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start fi-om step 1 again.
On the front Baneh
1. Press DSP MODE repeatedly until
"3D ACTION" or "3D
THEATER" appears on the
display.
The 3D-PHONIC, DSR and 131!PRO LOGIC indicators also
light up on the display.
2. Adjust the effect level.
1) Press ADJ UST repeatedly until "DSP
EFI_ECT" appears on the display.
• Once you have pressed ADJUST,
MUUFI CURSOR A / V can be also
used for selecting "DSP EFFECT."
• The display changes to show the
current setting.
2) Press MULTI CURSOR <11 l_ to
select the effect level.
• As you press it, the effect level
changes as follows:
Once you have adjusted the DAP modes, the adjustment is
memorized for each DAP mode.
Belbre you start, remember...
• Make sure that you have set the speaker inibrmation correctly
(see page 12).
• There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
• You cannot adiust the rear speaker output level when you have set
"REAR SPK" to "NONE." See page 12.
• You cannot make any adjustment for the headphones mode..
On the front panel:
ADJUST
I.
Press DSP MODE repeatedly until
the DAP mode -- LIVE CLUB,
DANCE CLUB, HALL,
PAVILION, or HEAD PHONE --
appears on the display.
MULtiCW_
_!.._ 2, Adjust the speaker output levels.
1) Press ADJ UST repeatedly until one of
The DSP indicator also lights up on the display. (When the
HEAD PHONE is selected, HEAD PHONE indicator lights up,
instead of the DSP indicator .)
• When you have set "REAR SPK" to "NONE," the 3D-
PHONIC indicator also lights up. (Except for "HEAD
PHONE.")
ADJUST
E DSP EFFECT1*-,'DSP EFFECT2 *-"DSP EFFECT3',-]/
*DSP EFFECT5_.._DSP EFFECT4
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
From the remote control:
1. Press SURROUND MODE
repeatedly until "3D ACTION" or
"3D THEATER" appears on the
display.
The 3D-PHONIC, DSP, and D[JPRO LOGIC
indicators also light up on the display.
2. Press SOUND.
The 10keys are activated for sound adjustments.
3. Press EFFECT to select an effect
level you want.
• Eachtime you press thebutton, the effect
level changes as follows:
SOUND
EFFECT
E DSPEFFECT1 "-*DSP EFFECT2 "_ DSP EFFECT3 '7
J
DSP EFFECT5_ DSPEFFECT4 *
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
2)
3)
the thllowing indications appears on
the display.
"REAR L LEVEL":
_1_adjust the left rear speaker level
"REAR R LEVEL":
_1_adiust the right rear speaker level
• Once you have pressed ADJUS'I\ MULTI CURSOR A / V
can be also used for selecting the speaker,
Press MUUI'I CURSOR <1 / C> to
_uLw _URSOR
u,theeedpouput
level (t¥om -10 dB to +10 riB).
Repeat 1) and 2) to adjust the other
speaker output level.
3. Adjust the effect level.
1) Press ADJ UST repeatedly until "DSP
EFI_ECT appears on the display.
• Once you have pressed ADJUST,
MUUfl CURSOR A / V can be also
used for selecting "DSP EFFECT."
The display changes to show the
current setting.
2) Press MULTI CURSOR <1 / E> to
select the effect level.
• As you press it, the effect level
changes as follows:
MULtiCW_
EFFECT2 DSPEFFECT3q
F DSP EFFECT1_DSP _ *
L_,DSP EFFECT5"_,-DSP EFFECT4 --
)
As the number increases, the selected DAI mode becomes
strongeE
21