Manual

JVC's One 'lBuch Operation function is used to assign and store
different sound settings for each different playing source. By using
this function, you do not have to change the settings every time you
change the source. The stored settings for the newly selected source
are automatically recalled,
The following can be stored for each source:
Volume level (see page 9)
Bass boost (see page 10)
]bne adiustment (see page 10)
Input attenuator mode (see page 10)
Subwoofer output level (see page 10)
Balance (see page 1l)
DSP modes
......3D-PHONIC mode settings (see page 21)
......DAP mode settings (see page 21)
......Surround mode settings (see page 22)
On the front oanel ONLY:
'lb store the sound settings
1. Press ONE TOUCH OPERATION ..................,_,_T,_
(INPUT ATT.) so that the ONE _,.<,.,
TOUCH OPERATION indicator
lights up on the display.
Using the Sleep Timer, you can t_all asleep to music and know the
receiver will turn off by itself rather than play all night.
From the remote control ONLY:
Press SLEEP repeatedly. SLEEP
The SLEEP indicator lights up on the display, [_ _
and the shut-off time changes as follows (in
minutes):
r 10 ..-_20 ..-,-30 ..-,-40 .._ 50 ..-_60 ..-,-70 ..-_80 ..-_90 q
O0 (Canceled) t n
When the shut-off time comes
The receiver turns off automatically.
"lb check or change the time remaining until the shut-off time
Press SLEEP once.
The remaining time until the shut-off'time appears in minutes,
• _1_change the shut-off time, press SLEEP repeatedly.
]b cancel the Sleep Timer
Press SLEEP repeatedly until "SLEEP 00min," appears on the
display. (The SLEEP indicator goes otiS)
• Turning off the power also cancels the Sleep Timer.
2. Adjust the sound using the functions listed above.
The newly adjusted settings are memorized,
'lb recall the sound settings
With the ONE TOUCH OPERATION lamp lit, the settings for the
currently selected source are recalled when the source is selected.
'lb cancel the One Touch Operation function
Press ONE TOUCH OPERATION (INPUT AT'E) so that the ONE
TOUCH OPERATION indicator goes off'.
(Even though the One Touch Operation function is canceled, the
recalled sound effects remain active.)
Note:
If the source is FM or AM, you can assign a different setting for each
band.
15