DVD Video Recorder & Video Cassette Recorder Instructions
Table Of Contents
- SAFETY FIRST
- CONTENTS
- DISC INFORMATION
- INDEX
- INSTALLING YOUR NEW UNIT
- INITIAL SETTINGS
- OPERATIONS ON DVD DECK
- Basic Playback
- Playback Features
- Locating A Desired Scene Using The DVD Menu
- Locating The Start Point Of The Item Or Skip The Item
- High-Speed Search
- Still Picture/Frame-By-Frame Playback
- Slow Motion
- Skip Search
- Resume Function
- Marking Positions To Play Back Again Later
- Checking The Time Information
- Angle Selection
- Subtitle Selection
- Audio Language/Sound Selection
- Audio Channel Selection
- Playback Control (PBC) Function
- Live Memory Playback
- Recording/playback Status Display
- To Play Back From The Beginning Of The Programme While Recording
- To Move Back The Playback Position Slightly While Recording (One Touch Replay function)
- To Watch A Programme Previously Recorded While Recording
- Overview Of Live Memory Playback
- Display During Live Memory Playback
- Buttons To Be Used During Live Memory Playback
- Using The On-screen Bar
- How To Access The On-screen Bar
- Basic Operation On The On-screen Bar
- Repeat Playback
- A-B Repeat Playback
- Locating The Beginning Of A Desired Selection
- Time Search
- Simulated Surround Effect
- Adjusting The Picture Quality
- Setting The Progressive Mode
- Programme Playback
- Random Playback
- Select The Switching Interval Of The Slide Show
- Parental Lock
- OPERATIONS ON DVD DECK
- OPERATIONS ON VCR DECK
- NAVIGATION (DVD DECK ONLY)
- EDITING
- REMOTE CONTROL
- SYSTEM CONNECTIONS
- SUBSIDIARY SETTINGS
- TROUBLESHOOTING
- GLOSSARY
- SPECIFICATIONS
- APPENDIX
- LIST OF TERMS
- Memo

Masterpage:Right0
EN 51
Filename [DR-MV1SEK_07VCR Operation.fm]
Page 51 April 15, 2004 1:27 pm
OPERATIONS ON VCR DECK
1 Load a cassette. Make sure the window side is up, the rear label
side is facing you and the arrow on the front of the cassette is
pointed toward the unit.
● Do not apply too much pressure when inserting.
● If the record safety tab has been removed, playback begins
automatically.
● The unit’s power comes on automatically and the counter is reset to
0:00:00.
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3 Find the programme start point. If the tape is advanced past the
start point, press 3. To go forward, press 5.
4 Press 4 to start playback.
● “BEST” appears blinking on the front display panel during automatic
tracking. (墌 pg. 55)
5 Press 8 to stop playback.
● To eject the cassette, press x.
Basic Playback
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
x
8
4
5
3
VCR/DVD
1
4
7
2
5
8
0
3
6
9
5
3
4
8
VCR/DVD
SAT
Clean the video heads using a dry cleaning cassette
— ECL-3F — when:
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
● “USE CLEANING CASSETTE” appears on the screen (only with
“O.S.D.” set to “AUTO”). (墌 pg. 82)
NOTE:
The heads get dirty in the following cases:
● in an environment prone to extreme temperature or humidity
● in a dusty environment
● flaw, dirt or mold on video tapes
● continuous usage for a long time
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on this unit. Simply
place the recorded cassette into a VHS Cassette Adapter and it can be
used just like any full-sized VHS cassette.
** This unit can record on regular VHS and Super VHS cassettes.
However, it will record regular VHS signals only.
• S-VHS recording is not possible with this unit.
● This unit is equipped with SQPB (S-VHS QUASI PLAYBACK) that
lets you watch tapes recorded in the S-VHS format and the SP
mode with regular VHS resolution.
• SQPB does not deliver Super VHS resolution.
DR-MV1SEK_00.book Page 51 Thursday, April 15, 2004 3:30 PM