DVD Video Recorder & Video Cassette Recorder Instructions
Table Of Contents
- SAFETY FIRST
- CONTENTS
- DISC INFORMATION
- INDEX
- INSTALLING YOUR NEW UNIT
- INITIAL SETTINGS
- OPERATIONS ON DVD DECK
- Basic Playback
- Playback Features
- Locating A Desired Scene Using The DVD Menu
- Locating The Start Point Of The Item Or Skip The Item
- High-Speed Search
- Still Picture/Frame-By-Frame Playback
- Slow Motion
- Skip Search
- Resume Function
- Marking Positions To Play Back Again Later
- Checking The Time Information
- Angle Selection
- Subtitle Selection
- Audio Language/Sound Selection
- Audio Channel Selection
- Playback Control (PBC) Function
- Live Memory Playback
- Recording/playback Status Display
- To Play Back From The Beginning Of The Programme While Recording
- To Move Back The Playback Position Slightly While Recording (One Touch Replay function)
- To Watch A Programme Previously Recorded While Recording
- Overview Of Live Memory Playback
- Display During Live Memory Playback
- Buttons To Be Used During Live Memory Playback
- Using The On-screen Bar
- How To Access The On-screen Bar
- Basic Operation On The On-screen Bar
- Repeat Playback
- A-B Repeat Playback
- Locating The Beginning Of A Desired Selection
- Time Search
- Simulated Surround Effect
- Adjusting The Picture Quality
- Setting The Progressive Mode
- Programme Playback
- Random Playback
- Select The Switching Interval Of The Slide Show
- Parental Lock
- OPERATIONS ON DVD DECK
- OPERATIONS ON VCR DECK
- NAVIGATION (DVD DECK ONLY)
- EDITING
- REMOTE CONTROL
- SYSTEM CONNECTIONS
- SUBSIDIARY SETTINGS
- TROUBLESHOOTING
- GLOSSARY
- SPECIFICATIONS
- APPENDIX
- LIST OF TERMS
- Memo
Masterpage:Right+
EN 25
Filename [DR-MV1SEK_04Name.fm]
Page 25 April 15, 2004 3:19 pm
INITIAL SETTINGS
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press we to select “FUNCTION SET UP”, then press ENTER.
4 Press we to select “VIDEO IN/
OUT”, then press ENTER.
5 Press rt to select “MONITOR
TYPE”, then press ENTER.
6 Press rt to select the desired
option, then press ENTER.
7 Press SET UP to complete the
setting.
*The boldface settings below indicate the settings at your
purchase.
8 MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX
4:3LB (Letter Box conversion): Select this when the aspect ratio of
your TV is 4:3 (conventional TV). While viewing a wide screen
picture, the black bars appear on the top and the bottom of the
screen.
4:3PS (Pan&Scan): Select this when the aspect ratio of your TV is
4:3 (conventional TV). While viewing a wide screen picture, the
black bars do not appear; however, the left and right edges of the
pictures will not be shown on the screen.
16:9 AUTO (Wide television conversion): Select this when the
aspect ratio of your TV is 16:9 (wide TV).
16:9 FIX (Wide television conversion): Select this when the aspect
ratio of your TV is fixed to 16:9 (wide TV). The unit automatically
adjusts the screen width of the output signal correctly when
playing back a picture whose aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image, “Pan&Scan” (PS) and
“Letter Box” (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
● The picture will be shown in the “4:3LB” mode
depending on the disc even if the “4:3PS” mode
is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Monitor Set (DVD Deck Only)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw e
VCR/DVD
SAT
DR-MV1SEK_00.book Page 25 Thursday, April 15, 2004 3:30 PM