OperationManual

Video image does not
appear
0
Is the lens cap removed?
0
Remove the lens cap. P. 9
0
Are devices properly
connected?
0
Connect the devices correctly. P. 19, 21
0
Is the power of the connected
devices turned on?
0
Turn on the power of the connected
devices.
-
0
Are correct
signals being output
from the connected devices?
0
Configure the connected devices
correctly.
-
0
Are the signals of the
connected devices possible
input signals?
0
Check to ensure that they are possible
input signals, and input compatible
signals accordingly.
P. 18, 18
0
Is the image temporarily
hidden?
0
Set “Hide” of the “Main” menu or “Image”
menu to “OFF” to display the image.
P. 32, 36, 37
Video image is blur
0
Is the projector out of focus?
0
Adjust the focus using “Focus” of the
“Lens” menu.
P. 31, 40
0
Is the projection distance too
short or too long?
0
Set it to a correct distance. P. 16, 17
Image is unusually
dark or bright
0
Is the brightness level properly
adjusted?
0
Adjust accordingly using “Brightness” of
the “Image” menu.
0
Adjust “Light Source Power” in the
“Option” menu.
P. 37
P. 41
Coloring of the image
is poor or distorted
0
Is the contrast level properly
adjusted?
0
Adjust accordingly using “Contrast” of
the “Image” menu.
P. 37
0
Are the signals of the
connected devices possible
input signals?
0
Check to ensure that they are possible
input signals, and input compatible
signals accordingly.
P. 18, 20
0
Is the input cable correctly
connected?
0
Connect the input cable correctly. P. 19, 21
Projection position on
the screen has shifted
0
Has the setup position of the
projector been shifted?
0
Check
the
setup position of the projector. -
Image disappears
suddenly
0
Are the video signals correctly
input?
0
Check the signals and connection. P. 18 to 21
Images do not appear
on the two-screen
mode display
0
Are the [DVI 1] and [DVI 3]
terminals connected for input?
0
To display images in the two-screen
mode, connect the [DVI 1] and [DVI 3]
terminals. The left screen displays
images of the [DVI 1] terminal, and the
right screen displays images of the [DVI
3] terminal.
P. 20, 21
Images do not appear
immediately after
power is turned on
0
Formatting is in progress.
0
Please wait
for a maximum duration of 3
minutes for the formatting progress to
end.
P. 29
The screen does not
darken immediately
when the projection
has ended
0
The ending process is in
progress.
0
Please wait for a maximum duration of 2
minutes for the ending progress to
complete after several hours of image
projection.
P. 31
The MENU is not
displayed correctly
0
It may
be affected by your Web
browser cache (temporary file
storage).
0
Delete all Web browser cache
(temporary file storage).
-
51
Others