OperationManual

Function
Sync Out
For selecting the type of signal to output from Sync Out.
Setting Description
Input (Positive) Outputs a signal that is synchronized with the vertical sync signal of the input video
signal. (*1)
Input (Negative) Outputs a signal with reversed polarity that is synchronized with the vertical sync
signal of the input video signal. (*1)
Low Fixes the output at Low.(*2)
High Fixes the output at High.(*2)
FEDSC Outputs a signal that is synchronized with the polarity information included in the
FEDSC packet. Outputs a Low when there is no FEDSC packet.
*1 Outputs the e-shift driving waveform if “e-shift” is set to “On(Positive)”, “On(Negative)” or “On(FEDEC)”.
*2
Does not function when “Display Mode” is set to “NV(FS)”.
0
3D sync signal is output during 3D signal input regardless of this setting.
Output signal varies as follows according to the format of the 3D signal.
Input Signal Output Signal
Dual, Quad (frame sequential) Outputs a signal that is synchronized with the input video signal.
Dual, Quad (stripes) Outputs a signal that is synchronized with the polarity information
included in the FEDSC packet.
Polarity switches to the setting in “3D Setting” " “Polarity”.
Off Timer
For setting the duration before the power turns off automatically when the projector is not operated.
0
Setting values: “Off”, “1 Hour”, “2 Hours”, “3 Hours” and “4 Hours”
* The setting will be retained even after the Off Timer operation has completed.
Network
For specifying the settings for external control from a PC or smartphone.
Setting Description
DHCP Client On Obtains the IP address automatically from the DHCP server inside the connected
network.
Off For configuring the network settings manually.
IP Address For configuring the IP address.
Subnet Mask For configuring the subnet mask.
Default Gateway For configuring the default gateway.
MAC Address Displays the MAC address of the unit.
Set Applies the network settings.
47
Adjust/Set