OperationManual

Specifications
Product Name D-ILA Projector
Model Name DLA-VS4550, DLA-VS4600, DLA-VS4700
Display Panel/Size D-ILA device *1, 2
0.69” 4K D-ILA (4096 x 2160 pixels) x 3
Light Source Blu-Escent Laser / Phosphor
Screen Size Approx. 60” to 300” (Aspect ratio of 4096 x 2160)
Brightness 3000 lm e g, 4000 lm f
Projection Distance Refer to P. 63.
Input Compatibility Signal Refer to P. 65.
Display Resolution 4096 x 2160 pixels e f, 8192 x 4320 pixels g*3
Input Terminal DisplayPort Input DisplayPort 1.2a, 20-pin (male) x 4
Output Terminal SYNC OUT Mini jack, TTL output x 1 *4
Control Terminal RS-232C Terminal Single, D-sub 9-pin (male) x 1 *5
Remote Terminal Stereo mini jack (remote control) x 1
LAN Terminal Single, RJ45 jack, 10BASE-T/100BASE-TX x 1
Service
Terminal
SERVICE Single (USB Type A) x 1 *6
Power Requirements AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption 750 W (during standby: 1.5 W *7)
Operation Environment Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60
°C
Installation Height Below 6,561 ft (2,000 m)
Dimensions (Width x Height x Depth) 500 mm x 235 mm x 703 mm (including feet)
Mass 34.6 kg
Accessories Refer to P. 11.
*1 D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
*2 D-ILA
devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3 During 3D playback, the display resolution is 4096 x 2160 pixels.
*4 For synchronizing with other equipment.
*5 For external control.
*6 Exclusively for firmware update.
*7 The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
0
Design and specifications are subject to change without prior notice.
0
Please
note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product.
62
Others