OperationManual

LED Indication
When “LED Indication” is set to “Off”, the LED indicator does not light up or blink under the following status.
0
When the time to replace the laser light source is near. (
P. 44)
0
When HIDE is on. (P.
62)
0
When the projector receives a signal from a remote control which is set to a different code mode (A or B). (
P. 43)
High Altitude Mode
For setting the high altitude mode to “On” or “Off”.
Set to “On” when using the projector at a location of low atmospheric pressure (higher than 900 m above sea level).
Display Setup
Back Color
For setting the color of the background to “Blue” or “Black” when there is no signal input.
Menu Position
For setting the display position of the menu.
Signal Display
For setting the display of the input information to “On” or “Off”.
Setting Description
Off Not displayed.
On Shows the input terminal for 5 seconds when input is switched.
Logo
For setting the display of logo during startup to “On” or “Off”.
Setting Description
Off Not displayed.
On Displays the “D-ILA” logo for 5 seconds during startup.
Setting Description
Off Turns off the laser light source when displaying the menu.
On Turns on the laser light source when displaying the menu.
41
Adjust/Set