OperationManual

Parameters used for the data format
The following 2 types of parameters are used for command and response data:
(1) ON/OFF (2) Special Parameter
Each parameter is as follows:
(1) ON/OFF
Shows the status (ON or OFF) of the unit, such as POWER and HIDE.
Character Hex Meaning
0 30 OFF
1 31 ON
(2) Special parameters
Operation mode parameters
Character Hex Meaning
0 30 Standby state
1 31 Power ON state
2 32 Cooling state
3 33 Emergency cooling state
4 34 Emergency state
DHCP client parameters
Character Hex Meaning
0 30 DHCP
1 31 STATIC IP
IP address parameters
Display the IP address using the dot (“.” (2HE)) delimiter.
Example: “192.168.0.10”
External control command table
Function Command
Setting Asking Data Type
Power On ELSE Power On ELSE ON/OFF Special Parameter
Power U0F
X (OFF) X (ON)
- -
X
-
Hide U00
X
-
X
-
X
-
Operation Mode UA0 - -
X X
- Standby...
DHCP Client UD2
X X X X
- DHCP...
IP Address UD3
X X X X
- 192.168. ...
Network Restart UDC
X X X X
- “0” Fixed
MEMO
0
After configuring “DHCP Client” and “IP Address”, execute “Network Restart”.
56
Others