OperationManual

Adjust Pattern
Setting Description
Off Displays the external signals without displaying the test pattern for adjustment.
On Displays the test pattern for adjustment.
Adjust
For configuring the correction value according to the current time.
0
Correction values can be configured for up to four points.
0
After
configuration
of the correction values for the four points is complete, “Adjust” will not be selectable. To configure
the setting, do so after erasing the unwanted correction values.
Setting Description
H (Horizontal) Setting range: -4 (moves Red/Green/Blue to the left) to +4 (moves Red/Green/Blue
to the right)
V (Vertical) Setting range: -4 (moves Red/Green/Blue downward) to +4 (moves Red/Green/
Blue upward)
Point 1 to 4
For editing or erasing preconfigured correction values directly.
The configured time is displayed in “Point 1 to 4” after configuration of the correction values is complete.
Reset
For erasing the preconfigured correction values in Point 1 to 4.
42
Adjust/Set