Operation Manual

Reducing the After-image of Fast-moving Images (Clear Motion
Drive (C.M.D.))
By using the high-definition image interpolation technology developed by JVC, after-images that appear in fast-moving
scenes can be reduced.
0
This option is disabled during PC signal input, 3D signal input, and when “2D to 3D conversion” is set to “On”.
0
For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.
.
Intermediate Frame GenerationIntermediate Frame Generation
Interpolation Enabled
Original Image
1
Press the [C.M.D.] button
0
Pressing the [C.M.D.] button each time switches the mode in the following
sequence: “Off”"“Low”"“High”"“Inverse Telecine”"“Off”...
Setting Description
Off Interpolation is not performed.
Low Softens the image quality.
High Image quality becomes softer than that of the “Low” setting.
Inverse Telecine 60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
0
Does not function for 24p video images.
* C.M.D. is the abbreviation for Clear Motion Drive.
* The [C.M.D.]
button is positioned differently on the remote control depending
on the model in use. (p. 17)
46
Adjust/Set