OperationManual (Software Ver.3.50-)

Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm (0 to 0.2 in)) can be adjusted by turning the feet.
Lift the unit and adjust the four feet.
ContractExtend
Feet
4 Locations
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift the image upward/downward or to the left/right. Set it to your
preferred position.
Æ “Adjusting the Lens According to the Projection Position” (P. 24)
Horizontal Position
Vertical Position: 0% (Center)
Up
to
about
43% r and 34% s t of the
projected image *
Vertical Position
Horizontal Position: 0 % (Center)
Up to about 100% r and 80% s t of
the projected image *
* 16:9 image
Lens Shift Range (16:9)
r
120
100
80
60
40
20
0 10 3020 40 50
Amount of horizontal shift (%)
Amount of vertical shift (%)
s t
90
80
60
70
50
40
30
10
20
0 10 3020 40 50
Amount of horizontal shift (%)
Amount of vertical shift (%)
0
The maximum vertical shift varies with the amount of
horizontal shift. Similarly,
the maximum horizontal shift
also changes with the amount of vertical shift.
0
The values on
the graph are intended as a guide. Use
them for reference during installation.
18
Set up