OperationManual

Viewing HDR10+ Content
1
Press the [MENU] button to display the menu, and set “Content Type” to “Auto” or
“HDR10+” in the “Picture Adjust” menu.
2
Enter the HDR10+ content.
0
When
“Input Signal” " “HDMI EDID Setting” " “HDR10+” is configured to “Off”, the receiving of HDR10+ is disabled.
To enjoy HDR10+ content, configure to “On”. (“HDMI EDID Setting”P. 77)
Setting Frame Adapt HDR
1
Press the [MENU] button to display the menu, and set “Content Type” to “Auto” or
“HDR10” in the “Picture Adjust” menu.
2
Configure “Picture Mode” to “Frame Adapt HDR 1”~“Frame Adapt HDR 3” in the
“Picture Adjust” menu.
0
You can also configure the setting by pressing the [PICTURE MODE] button and using the ↑↓ keys to select
“Frame Adapt HDR 1”~“Frame Adapt HDR 3”. (
P. 40)
0
Enter the HDR10 content when “Picture Mode” is configured to “Auto”.
3
Configure to “HDR Processing” in the “Picture Adjust” menu.
(“HDR Processing”P. 71)
*
4
Configure to “HDR Quantizer” in the “Picture Adjust” menu.
(“HDR Quantizer”P. 72)
*
*
This can be configured only when “Picture Mode” is configured to “Frame Adapt HDR 1”~“Frame Adapt HDR 3”.
MEMO
0
If you wish to watch HDR10 content in the “Frame Adapt HDR 1”~“Frame Adapt HDR 3” picture mode, we
recommend that you enable automatic switching to “Frame Adapt HDR 1”~ “Frame Adapt HDR 3” in “Input
Signal”"“Auto Pic.Mode Select”"“HDR10”. (
“Auto Pic.Mode Select”P. 76)
0
Configuring “Theater Optimizer” to “On” enables “HDR Quantizer” to be configured automatically according to the
screen size and state of the projector. (“Theater Optimizer”P.
72)
48
Adjust/Set