CU-VD40E_EN.
CU-VD40E_EN.book Page 2 Wednesday, June 6, 2007 10:40 AM Enjoy High Definition Images Copied to DVDs! Copying to DVD A Connect. Audio/Video cable (provided) (provided) B Select the desired copy method. The following 6 methods of copying are available. Methods of copying Copy all (NORMAL BACK-UP) Copy only favourite scenes (SELECT BACK-UP) Types of copy operation GZ-HD7 instruction manual Copy all images shot. 0Page 48 Copy only newly shot images. 0Page 48 Search and copy by date.
CU-VD40E_EN.book Page 3 Wednesday, June 6, 2007 10:40 AM Viewing Images Copied to DVD on the TV A Connect. Audio/Video cable (provided) A Disconnect the USB cable and turn off this burner. B Connect the burner to the TV. z To view high definition images, connect using an optional HDMI cable or component video cable. B Play back. A Turn on the burner. z Confirm that the power lamp is lighted in orange. If the lamp is not lighted in orange, disconnect the USB cable then turn off and on the power again.
CU-VD40E_EN.book Page 4 Wednesday, June 6, 2007 10:40 AM This burner enables DVDs of videos recorded with the JVC Hard Disk Camera to be created without using a PC. ● If you want to edit videos recorded with the camera and create your original DVDs, use the software provided with the camera for editing and creating DVDs. ● The provided data writing software Power2Go 5.5 Lite can be used for writing data. However, it cannot be used to edit videos or create DVDs.
CU-VD40E_EN.book Page 5 Wednesday, June 6, 2007 10:40 AM DON’T use makeshift stands and NEVER fix legs with wood screws ^ to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions. DON’T allow electrical equipment to be exposed to rain or moisture.
CU-VD40E_EN.book Page 6 Wednesday, June 6, 2007 10:40 AM Contents DVD Burner Enjoy High Definition Images Copied to DVDs! .........................2 CU-VD40 ENGLISH Copying to DVD ............................................................................................ 2 Viewing Images Copied to DVD on the TV................................................... 3 Safety Precautions .....................................................................4 Contents..........................................
CU-VD40E_EN.book Page 7 Wednesday, June 6, 2007 10:40 AM Getting Started Accessories Power cord Remote control (RM-V41U) USB cable CD-ROM Audio/Video cable AC adapter (AP-V400U) Recording disc (DVD-R DL) (For use with high definition Everio Camera. Cannot be used with an Everio Camera.) Stand Lithium Battery (CR2025) Pre-installed in the remote control unit. CAUTION: z Do not use the provided AC adapter and power cord with other devices.
CU-VD40E_EN.book Page 8 Wednesday, June 6, 2007 10:40 AM Guide to Parts and Controls Front .................................................................................................................................................................. H A B C D E F G A Open/Close Button (M) B Power Button (C/B) C Power Lamp Green light: When connected to Everio camera or PC. Orange light: During playback.
CU-VD40E_EN.book Page 9 Wednesday, June 6, 2007 10:40 AM Connecting to TV To view high definition images, connect using an optional HDMI cable or component video cable. Connecting to a TV with HDMI Input Terminal TV This burner COMPONENT VIDEO OUT PR DC R PB Y L VIDEO HDMI AUDIO HDMI cable (not provided) NOTES: z Images can only be displayed on a High-bandwidth Digital Content Protection (HDCP) monitor.
CU-VD40E_EN.book Page 10 Wednesday, June 6, 2007 10:40 AM Connecting to a TV with Video/Audio Input Connectors Connect the output connectors of the burner to the input connectors of the TV with the provided Audio/Video cable.
CU-VD40E_EN.book Page 11 Wednesday, June 6, 2007 10:40 AM Saving Everio Camera Images to DVD You can easily create data discs by connecting the burner to an Everio camera. A Press the [OPEN/CLOSE] button To Connect after the menu appears on the Everio. PREPARATIONS: z Power/Mode switch (Everio camera) : Off z Power switch (This burner) : Off z The disc tray opens. B Insert a disc. z We recommend you to use a compatible disc. (0P25) C Press the [OPEN/CLOSE] button. z The disc tray closes.
CU-VD40E_EN.book Page 12 Wednesday, June 6, 2007 10:40 AM Saving PC Images to DVD This burner can be used as a DVD burner by connecting it to a PC. Images edited on a PC can also be saved to a DVD by using the provided software. To Connect PREPARATIONS: z Power switch (This burner) : Off z PC Power : Off USB cable (provided for the Everio camera) USB z For details on how to save, refer to the Power2Go User’s guide, Help and ReadMe.
CU-VD40E_EN.book Page 13 Wednesday, June 6, 2007 10:40 AM Installing CyberLink Power2Go 5.5 Lite E Enter the “User Name” and “Company Name” and then click “Next”. CAUTION: z Do not play the provided CD-ROM in an audio player. It is not an audio CD. Playing this CD-ROM in an audio player will result in a loud high noise. It may also damage the circuit and speaker. A Insert the provided CD-ROM in the PC. F Follow the on-screen instructions. z The “Choose Setup Language” screen appears.
CU-VD40E_EN.book Page 14 Wednesday, June 6, 2007 10:40 AM Folder Configuration This shows the folder configuration when files are saved from a high definition Everio camera or a PC to DVD. When video/still image files are saved from high definition Everio camera ..................................................................................................................................................................
CU-VD40E_EN.book Page 15 Wednesday, June 6, 2007 10:40 AM Viewing Images Saved in DVD This burner can play DVDs saved from an Everio camera or a PC. Viewing Videos Saved from High Definition Everio Camera To playback the image immediately after saving in DVD 1. Remove the USB cable. (0P12) 2. Turn off the power of this burner. 3. Connect to TV and power on this burner. z Confirm that the power lamp on the burner is lighted in orange. For details on connections, refer to “Connecting to TV” (0P9, 10).
CU-VD40E_EN.book Page 16 Wednesday, June 6, 2007 10:40 AM Buttons that can be used during playback .................................................................................................................................................................. Button names PAUSE During video playback Pressing the button during pause or variable speed playback will play the video. z You can also use the [ENTER] button. Stops the playback and displays still images. z You can also use the [ENTER] button.
CU-VD40E_EN.book Page 17 Wednesday, June 6, 2007 10:40 AM Viewing Still Images Saved from High Definition Everio Camera To playback the image immediately after saving in DVD 1. Remove the USB cable. (0P12) 2. Turn off the power of this burner. 3. Connect to TV and power on this burner. z Confirm that the power lamp on the burner is lighted in orange. For details on connections, refer to “Connecting to TV” (0P9, 10). When all still images shot on a high definition Everio camera are saved in DVD.
CU-VD40E_EN.book Page 18 Wednesday, June 6, 2007 10:40 AM Viewing DVD Videos Saved from Everio Camera To playback the image immediately after saving in DVD 1. Remove the USB cable. (0P12) 2. Turn off the power of this burner. 3. Connect to TV and power on this burner. z Confirm that the power lamp on the burner is lighted in orange. For details on connections, refer to “Connecting to TV” (0P9, 10). CAUTION: z Check the resolution setting if the image is not displayed.
CU-VD40E_EN.book Page 19 Wednesday, June 6, 2007 10:40 AM Viewing High Quality Images You can change the video output resolution when the burner is connected to a progressive scan TV via an HDMI cable or component video cable. A Change output resolution during stop mode. B Select “YES”. 1. SELECT CURRENT RESOLUTION : 576i DO YOU WANT TO SAVE THE SETTINGS? YES z Every press of the button changes the resolution as follows. Connection via HDMI cable.
CU-VD40E_EN.book Page 20 Wednesday, June 6, 2007 10:40 AM Changing the Settings Configures basic settings that determines the operation of the burner. Menu Operation Procedures F Select “YES”. To change the “SELECT TV TYPE” of “VIDEOS” from “16:9” to “4:3LB”. 1. SELECT SETTINGS VIDEOS SELECT TV TYPE When connected to TV and power is on 4:3 LB HDMI COLOR SETTING AUTO DO YOU WANT TO SAVE THE SETTINGS? HDMI ENHANCE SETTING OFF YES A Display the “SETTINGS” screen. SAVE 2.
CU-VD40E_EN.book Page 21 Wednesday, June 6, 2007 10:40 AM Setting Items And Contents is the default setting. VIDEOS SELECT TV TYPE Configure the settings according to the TV to be connected. (If the screen size setting of the TV is fixed, the screen size setting of the TV remains the same even if you change the setting on this burner.) 16:9 When connected to a wide TV (16:9). When connected to a 4:3 TV (16:9 images will appear with black bands on the 4:3LB top and bottom).
CU-VD40E_EN.book Page 22 Wednesday, June 6, 2007 10:40 AM Screen Display Information during playback can be displayed on the screen. During playback When playing video saved from a high definition Everio camera ............................................................................. File Date (Displays the date and time of recording of the first file in the folder.) z Every press of the button changes the display mode. File Name 1.6.
CU-VD40E_EN.book Page 23 Wednesday, June 6, 2007 10:40 AM Troubleshooting Trouble Cause/Action General Cannot turn the power on. z Make sure the AC adapter and power cord are connected properly. The burner or AC adapter is hot. z This is not a malfunction. z If the burner is abnormally hot, remove the AC adapter and consult the dealer from which you purchased the burner. After pressing the power button, it takes approximately 20 seconds before the burner becomes operable.
CU-VD40E_EN.book Page 24 Wednesday, June 6, 2007 10:40 AM Trouble Cause/Action No images on the TV. z Is the video input displayed? Change to external output for the burner connected to a TV with video/audio input connectors. z When the image is not displayed on the TV after pressing the [RESOLUTION] button, do not operate the burner for 15 seconds. The resolution setting before the change is restored. (0P19) z Check the resolution setting again.
CU-VD40E_EN.book Page 25 Wednesday, June 6, 2007 10:40 AM Specifications General ............................................................................. Power Supply DC12 V Weight Approx. 32 g (including button battery) Rated current 1.7 A ............................................................................. Dimensions (W c H c D) 171 c 56 c 262 mm DVD-R JVC, TDK, Verbatim, SONY Weight of main unit Approx. 1.
CU-VD40E_EN.book Page 26 Wednesday, June 6, 2007 10:40 AM Component video output Y p-p : 1.0 V 75 & (Pin jack) CB/CR, PB/PR p-p : 0.7 V 75 & (Pin jack) HDMI output 19-pin HDCP compliant Video : 576p / 1080i / 720p Audio : 2CH PCM/Bit stream CAUTION: z Discs other than those stated above, and commercially available DVD videos cannot be played back properly. When connected to an Everio camera ............................................................................. Interface USB2.
CU-VD40E_EN.
CU-VD40E_EN.
