Instruction Manual

24 EN
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
ACCESS MENU SCREEN
2
Press MENU.
SELECT FUNCTION
3
Press + or – to place the highlight bar on the desired
function.
MAKE SETTING
4
The setting procedure depends on the function you
select.
If you select GAIN UP, TELE MACRO, INTERVAL
TIMER, REC TIME or JLIP ID NO. . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears.
If you select SET CHARACTER or DATE/TIME, . . .
.... press NEAR to access the selection menu for
each function (SET CHARACTER – Z pg. 21;
DATE/TIME – Z pg. 7).
CLOSE MENU
5
Press MENU. The normal screen reappears.
NOTE:
The menu is available only in the Record-Standby mode.
RECORDING Advanced Features (cont.)
MENU
FAR
NEAR
PROGRAM AE select dial
LCD monitor or viewfinder
PAUSE
GAIN UP S.LX
TELE MACRO OFF
INTERVAL TIMER OFF
REC TIME OFF
JLIP ID NO. 07
SET CHARACTER 
DATE/TIME 
END :MENU KEY
GAIN UP NORM
TELE MACRO ON
INTERVAL TIMER 1MIN
REC TIME 1/2S
JLIP ID NO. 07
SET CHARACTER 
DATE/TIME 
END :MENU KEY
If GAIN UP or TELE MACRO in the
Menu has been changed from the
factory settings, this mark appears.