OperationManual

- 6 -
ENGLISH
Manufacturer
JVCKENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku,
Yokohama-shi, Kanagawa
221-0022, JAPAN
UK Responsible Person
JVCKENWOOD U.K. Limited
First Floor, Gleneagles, The Belfry, Colonial Way, Watford, Hertfordshire
WD24 4WH, UNITED KINGDOM
Warning
This apparatus must be earthed because of Class I equipment.
This apparatus is not a patient contact equipment.
When using at 240 V in the United States, supply must be from center-tapped, 240 V,
single phase circuit.
Consult your dealer about waste disposal.
This apparatus shall not to be used in the vicinity of the patient, which is the space
with surfaces likely to be contacted by the patient or an attendant who can touch the
patient. This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of
the bed in its intended location, and extending vertically 2.29 m (7-1/ 2 feet) above
the oor.
Equipment classication
Type of protection against electric shock: Class I equipment
Protection against harmful ingress of water: Ordinary Equipment (IPX0)-No
protection.
Not suitable for use in the presence of ammable anesthetics or oxygen.
Mode of operation: Continuous operatio