OperationManual

- 34 -
Main screen
Sub screen
Layout 2
Sub screen
Layout 3
Sub screen
Layout 4
Shrunk sub screen is displayed on upper, middle, lower of right side in
main screen for each case of Layout 2, Layout 3 and Layout 4. Shown as
below.
＜ How to set up a split screen display ＞
・ Please use our recommended graphics card when splitting the screen.
Please refer to the following steps to set screen display.
1
Turn off your
workstation
.
2
Connect each supplied DisplayPort
cables
to "DisplayPort IN1" and
"DisplayPort IN2", and the other side
to out ports of your workstation.
3
Turn on this product first, and then
turn
on your workstation.
4
Change the "Display settings" of
your
workstation, select "1920 ×
2160" for both screens.
5
Tap "Operation key", and select
"Management-1" on the main menu. Select
"PbyP On" on "PIP/PbyP".
※ Maintain "Layout 1", which is default, on
"PbyP Layout.
To
workstation
DisplayPort output
ENGLISH