OperationManual

- 25 -
- This product is intended to be connected to an IEC 60601-1 certied device and
medical electrical system. To use this product without connecting to such a
device, it needs to be evaluated according to the requirements of IEC 60601-1.
- Use the supplied power cord only.
Caution
ENGLISH
Connecting the cables
1
Turn o the workstation.
2
DisplayPort-screen:
Connect “DisplayPort IN1” or “DisplayPort IN2” on this monitor to “DisplayPort”
output on your workstation with the supplied DisplayPort cable.
DVI-D-screen:
Connect the supplied DVI-D cable to the “DVI-D” port on this product and the
“DVI-D” port on the workstation.
Note
Use the supplied cables. If you do not use them, the monitor may become
unstable and the screen may icker.
3
Connect the supplied USB cable to the “UP” stream port on this product and the
“DOWN” stream port on the workstation (or other USB hub) when the product is
controlled (conguration change or quality control) by the workstation.
4
Connect the supplied power cable between the AC inlet and the wall outlet.
5
Turn on the monitor and the workstation.
The wall
outlet
The “DOWN” stream port
on the
workstation
2
4
3
For use in the U. S.
The
workstation
’s
DisplayPort/DVI-D
connector
Back of the monitor
For use in Europe