OperationManual

- 16 -
ENGLISH
Warning
Do not disassemble, repair, or alter the monitor.
It could cause re, electric shock, or injury. Servicing of such a monitor may
be refused. Or a fee may be charged even within the warranty period. Ask
your dealer for repairs.
Do not continue using the monitor when failure or abnormality is
found.
It could cause re or electric shock.
Do not touch or swallow the liquid crystal that may leak from the
damaged panel.
It could cause skin irritation. If it gets into the eye, ush the eye with water
and call your doctor. If it adheres to skin or clothes, wash it o immediately
with water. It contains a stimulating substance.
Do not put anything on top of or over the monitor.
It could cause the monitor to fail or cause re.
Do not put anything over the cables.
It could cause the monitor to fail or cause re.
Do not handle the monitor with wet hands.
It could cause the monitor to fail or cause electric shock.
No modication of this equipment is allowed.
Do not modify this equipment without authorization of the
manufacturer.
If this equipment is modied, appropriate inspection and testing
must be conducted to ensure continued safe use of the equipment.
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
AC power inlet is considered as Disconnect Device.
Double pole, neutral fusing. Disconnect mains before servicing.
If smoke or odor is observed, turn o and unplug the monitor
immediately.
Continual use could cause re or electric shock. Consult your dealer.