Žæˆµà–¾‘

- 32 -
English
OSD Menu table-2
ICON ITEMS Functions and description
MAIN MENU
IMAGE
ADJUST
*2
AUTO ADJUST
Make Automatic adjustment according to the
state of the video signal.
Adjusting items are as follows.
-Screen Position.
-Contrast
-Black Level.
-RGB Gain
HORIZONTAL
POSITION
Adjust the horizontal screen position of the
display area.
Adjustable range is from 0 to 100:
Default setting is 50
VERTICAL
POSITION
Adjust the vertical screen position of the display
area.
Adjustable range is from 0 to 100:
Default setting is 50
CLOCK
Adjust the horizontal dot pitch for the analog vide
signal.
Adjustable range is from 0 to 100:
Default setting is 50
PHASE
Adjust the dot clock phase to minimize the icker,
smear and noise.
Adjustable range is from 0 to 100:
Default setting is 50.
EXIT:
Exit from the image adjust sub-menu.
INFORMATION
Display the monitor information listed below.
1. MODEL: List the Model name.
2. S/N: List the Monitor serial number.
3. COLOR MODE: List the current COLOR MODE setting.
4. RESOLUTION:Display the receiving signal Resolution.
5. H.FREQUENCY:List Horizontal frequency.
6. V.FREQUENCY:List Vertical frequency.
7. OPERATION HOURS:
Display the Backlight Operation Hours in (Hours)
Note: Only cumulated active Backlight working hours. Does not
cumulate the power saving hours.
8. FIRMWARE VER:List the monitor Firmware version.
LANGUAGE
ENGLISH
Set the OSD Language to English
.
DEUTSCH
Set the OSD Language to Germany.
日本語
Set the OSD Language to Japanese.
EXIT
Exit from the Language sub-menu.
i
i
i