Žæˆµà–¾‘

- 15 -

English

Warning

Do not disassemble, repair, or alter the monitor. It could cause re, electric

shock, or injury. Servicing of such a monitor may be refused. Or a fee may

be charged even within the warranty period. Ask your dealer for repairs.

Do not continue using the monitor when failure or abnormality is found. It

could cause re or electric shock.

Do not touch or swallow the liquid crystal that may leak from the damaged

panel. It could cause skin irritation. If it gets into the eye, ush the eye with

water and call your doctor. If it adheres to skin or clothes, wash it o󰀨

immediately with water. It contains a stimulating substance.

Do not put anything on top of or over the monitor and the AC adapter. It

could cause the monitor to fail or cause re.

Do not put anything over the cables. It could cause the monitor to fail or

cause re.

Do not handle the monitor with wet hands. It could cause the monitor to fail

or cause electric shock.

If smoke or odor is observed, turn o󰀨 and unplug the monitor immediately.

Continual use could cause re or electric shock. Consult your dealer.

If by accident you drop the monitor or give it a jolt, turn o󰀨 and unplug the

monitor immediately. Continual use could cause re or electric shock.

Consult your dealer.

If liquid or any foreign object enters inside, turn o󰀨 and unplug the monitor

immediately. Continual use could cause re or electric shock. Consult your

dealer.

To avoid a lighting strike, stop using the monitor during thunder. It could

result in electric shock.

Make sure to use the supplied power cable and the AC adapter. The use of

a cable and/or an AC adapter other than supplied could cause the monitor to

fail.

The input voltage for this monitor is limited to AC 100 V to AC 240 V. Do not

use it at any other voltage. Failure to do so could cause the monitor to fail or

cause re.

The monitor must be grounded. Failure to do so could cause electric shock.

When using a 2P plug, ground the monitor before plugging into a wall outlet.

To remove the grounding cable, unplug the monitor rst.