Manual

This page is for when operating your TV using the
remote control of this product.
TV/VIDEO
TVCHANNEL TVVOL
@
@
TV RETURN 100+
Number
buttons
Setting the manufacturer's code
Slide the remote control mode
selector to the TV side.
AUDIOTv [_] !
2 Keep pressing down O/ITV.
NOTE
Keep pressing down 0/I TV until Step 4 is complete.
3 Press ENTER and release.
Getting started
4 Press number buttons (1-9, 0).
Examples:
For a Hitachi TV: Press 1, then O.
For a Toshiba TV: Press O, then 8.
If there are more than one manufacturer's codes,
try them in turn and select the one that causes the
_roduct to work properly.
Manufacturer Code Manufacturer Code
JVC 01 Samsung 12
Hitachi 10 Sanyo 13
Magnavox 02 Sharp 06
Mitsubishi 03 Sony 07
Panasonic 04, 11 Toshiba 08
RCA 05 Zenith 09
5 Release ©/ITV.
ForTVoperation
Operate the remote control by pointing it towards
the TV.
7v Turn ON/OFF the power.
TVCHANNEL Change channels.
+
=i
TVVOL Adjust volume.
AUDIO_ # Select channels.
100+ TV
TVRETURN Alternates between the
previously selected channel
and the current channel.
W/VIDEO Switch TV and video input.
"1 Make sure to slide the remote control mode
selector to the TV side in advance.
NOTE
When the batteries are replaced, perform the
manufacturer's code setting again.
7