Manual
Troubleshooting Reference
When you encounter a problem that seems to be a
fault, check the following points before contacting
your JVC service center:
Power source
• Power does not come on.
• The power cord is not connected to the main
unit or an AC outlet.
-_ Connect the power cord correctly.
(_, page 11 )
• TheTV screendarkens.
• "SCREEN SAVER"is set.
-_ If set, press any button. (- page 29)
• Thescreencannotbe switched.
• The Progressive mode is applied only to
component video output.
About sound
• Thereis nosound.
• Speakers are not connected correctly.
Operation
• Youcannotoperateanybutton.
• Some specific operations may be inhibited
for some discs.
• The remote control does not work.
• The dry-cell batteries have run out.
Replace the batteries. (: -" page 6)
: -. page 9
The sound is muted.
-_:_ page16
"NO AUDIO" is displayed on the display
window.
The disc may have been produced through
illegal copying.
Confirm at the store where you bought the
disc.
• A disc cannot be played back.
• In the case of DVD VIDEO discs
-_ Check the Region Code number of the
discs. (. _ page 3)
• "PLAYABLE Err" is displayed on the display
window.
It is not a disc that can be played on this
system.
Check the disc type. (- page 3)
• Parental Lock is set. ( "page 30)
About images
• No pictureappears.
• The video cord is not connected correctly.
-_ •_ page 11
• Both of the component video jack and S-
video jack are connected.
Connect either. (:_ page 11)
• The pictureis distorted.
• A VCR is connected between the main unit
and the TV set.
-_ Connect the main unit directly to the TV
set. (: -" page 11)
• Although this system is connected to a non-
Progressive TV set, DVD's scan mode is set
to "PROGRESS".
Set the scan mode to "INTER.".
(__ page 26)
• Thescreensize is abnormal.
• The screen size is set improperly.
Set "MONITOR TYPE"accordingto the TV
set you are using. (: -" page 29)
• The sound is weak compared with TV or Video.
• "DVD LEVEl" is set to "NOR".
-_ Set to other than "NOR". (. -" page 26)
• Thesoundis distorted.
• The volume is turned up too high.
Turn down the volume. (:_ page 16)
No sound comes out of the subwoofer.
• "SUB WFR" is turned off.
Press S.WFR OUT to turn on.
(_:" page 10)
About radio
• The sound is noisywhile receiving./Receiving
is disabled.
• The antenna is not connected correctly.
-_ Connect the antenna correctly.
(__"page 8)
37










