Datasheet

ManualsBrandsJVC ManualsDVD-playersBR-DV3000U(B)

User-friendly design

Audio indicator

This indicator lights whenever audio signals are input. Also, it provides a convenient

way to check for the presence of the audio signals during tape playback.

Wireless/wired remote control

Connecting the optional RM-G30 controller to the REMOTE connector

enables you to control BR-DV3000 operations from a distance. There's

also a wireless remote control that provides control over field advance

(1st/2nd), frame advance, menu display, audio reference level selection

(-20 dB or -12 dB, in the Playback mode only), color bar display and

blank search, as well as in addition to basic operations.

20x high-speed time code search/blank search

The built-in time code generator provides preset (rec run) and regene time codes.

In combination with the 20x search function (100x max. in the FF or REW mode),

this provides super-fast access to any target point on the tape with visible pictures.

Continuous recording

When a camcorder is connected to the

BR-DV3000 via the DV connector, the

BR-DV3000 will start recording 5 minutes

before the tape in the camcorder ends.

This enables continuous shooting for extended periods with no breaks in the

recording.

Repeat playback

When the video signal ends or tape ends, playback starts again from the beginning

of the recorded video or tape (video end repeat/tape end repeat).

Vertical operation

The new tape mechanism is compatible with either vertical

or horizontal operation, making it easy to install the compact

BR-DV3000 in a narrow space or close to a non-linear

system.

On-screen menu

Systematic, easy-to-understand menu screens simplify

setting and operation procedures. Menu setting can be

done using either the buttons on the front panel or the

wireless remote control.

DVCAM NTSC PAL REC INH.

OPERATE

A.DUB REC PLAY PAUSE

EJECT

REW STOP FF

SET

MLNU

MIC REMOTE SEL.

SERIAL

INPUT SEL.

SERIAL

BR-DV3000

VIDEO CASSETTE RECORDER

CH-1/3

CH-2/4

9PIN WIRELESS DV Y/C

BR-DV3000U (NTSC) DV Recorder

BR-DV3000E (PAL) DV Recorder

The BR-DV3000 is a simple, no-frills recorder/player with a compact and stylish design that can be

installed horizontally or vertically.

Monitor

BR-DV3000

Non-linear editing

system

DV-cable

GY-DV5100 BR-DV3000

DVCAM NTSC PAL REC INH.

OPERATE

A.DUB REC PLAY PAUSE

EJECT

REW STOP FF

SET

MLNU

MIC REMOTE SEL.

SERIAL

INPUT SEL.

SERIAL

BR-DV3000

VIDEO CASSETTE RECORDER

CH-1/3

CH-2/4

9PIN WIRELESS DV Y/C

MONITOR

EDITSEARCH

FILTER

STATUS

SHUTTER

AUTO IRIS

BACK L

NORMAL

SPOT L

STRETCH

NORMAL

COMPRESS

FULL AUTO BLACK LOLUX

MODE

POWER

ON OFF

VTR

OPEN

VTR

CAM

3200K

5600K

CH-1

AUDIO IN

AUDIO SELECT

CH-2

CH-1 CH-2

FRONT

REAR

AUTO

MANUAL

AUDIO

LEVEL

CH-1 CH-2

PULL

OPEN

LCDBRIGHT DISPLAY

System flexibility with various interfaces

NTSC/PAL compatibility

Switch between NTSC or PAL as required. This makes it easy

to work with internationally sourced material and transfer it to a

non-linear system for editing. You can also record to Standard

DV or Mini DV tape in either NTSC or PAL system.

*Cannot be used as an NTSC/PAL converter.

The BR-DV3000 can record and play back signals in both NTSC and PAL formats.

Y/C input/output and composite input/output

In addition to DV input/output, the BR-DV3000 is equipped

with the Y/C input/output and composite input/output.

RS-422A interface

As the BR-DV3000 is equipped with an industry-standard

RS-422A interface, DV source material can be transferred to a

variety of formats for editing.

*The BR-DV3000 can be used as a player when connected to the RM-G820. It cannot be used as a recorder.

DVCAM playback capability

DVCAM recordings can be played back directly on the

BR-DV3000. This makes it easy to use DVCAM recordings as

source material for editing.

Built-in auto error correction system

This system operates on a frame-by-frame basis to ensure

accurate error compensation under any conditions, enabling

consistent suppression of block noise and reliable, professional-

standard performance at all times.

Closed caption (NTSC only)

A closed caption signal can be recorded and played back

through analog interface.

Wireless remote control (provided)

Application

Non-linear editing system

Materials recorded on a Standard or Mini DV tape can be transferred to the

non-linear system via the DV interface. After you finished the editing on your

non-linear system,

signals can be

directly transferred

to this VTR for

archiving.

GYDV5000/6000/3000_C 05.1.17 7:50 PM ページ 10