Projection Television Users Guide
Table Of Contents
Initial Setup
41
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
Press the M
ENU button
π†
To CLOSED CAPTION
è
To operate
π†
To select CAPTION or TEXT
è
To select a caption (CC1 to CC4) or text channel
(T1 to T4)
Press the OK button to save
Press the MENU button when finished
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 59.
Notes:
Closed Caption
This function automatically shuts off your TV when there is no signal from the channel the
TV is on.
Press the M
ENU button
π†
To AUTO SHUT OFF
è
To turn ON or OFF
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text
“NOT RECEIVING A SIGNAL” appears on the screen, and
starts the countdown. If no signal is being received within
10 minutes, the TV shuts itself off.
Auto Shut Off
AV-56\65WP84 English 41 7/11/03, 9:32:50 AM