Projection Television Users Guide

ManualsBrandsJVC ManualsProjection TVAV 56P775

Initial Setup

When you are using a surround system, you can substitute the speaker of this television for

the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the

speaker as the center speaker of your surround system. The volume differs when the TV is

being utilized as the Center Channel Input versus when it is not.

Press the MENU button

π†

To CENTER CH INPUT

√®

To adjust CENTER CH INPUT to ON

or OFF

Press the MENU button when finished

Note:

• In order to use the CENTER CHANNEL SPEAKER feature, you need a video signal present

as well as sound. Because of that we recommend using this feature for Home Theater setup

only. If there is no video signal present, the TV will be muted.

• There are two different volume adjustment levels, one for regular TV and one for TV used as

a CENTER CHANNEL. Please remember that when switching CENTER CHANNEL mode ON

and OFF in TV menu.

Center CH Input

INITIAL SETUP

SELECT OPERATE EXIT

(1/5)

DIGITAL-IN

DIGITAL-IN AUDIO

CENTER CH INPUT

SIZE1

DIGITAL

VIDEO-1 MONITOR OUT

OFF

This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,

should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to

"ON".

Press the M

ENU button

π†

To VIDEO-1 MONITOR OUT

√®

To select ON or OFF

Press the MENU button to finish

Video-1 Monitor Out