Projection Television Users Guide

ManualsBrandsJVC ManualsProjection TVAV-56P585

MTS technology allows several audio signals to be broadcast at once, giving you a choice

in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP).

Press the MENU button

π†

To MTS

√®

Select the mode

(The ON AIR arrow tells you if a broadcast is in stereo and/or

contains an SAP).

Press the MENU button when finished

Notes:

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo

mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

• MTS unavailable if your television’s input source is in input 1, 2, 3 or 4 mode, as described

on page 57.

These settings allow you to change and adjust the sound on your television.

BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with

the bass adjustment.

TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.

BALANCE – Adjust the level of sound between the TV’s left and right speakers with the

balance setting.

Press the MENU button

π†

To BASS, TREBLE or BALANCE

√ ®

To adjust the setting

π†

To move to the next setting

Press the MENU button when finished

Note:

• You can reset the sound adjustments (BASS, TREBLE and

BALANCE) you set at once as the default setting when you select reset. See page 51.

• You can adjust BALANCE only when A.H.S. is off. See page 58.

Sound Adjust

Sound Settings

MTS (Multi-Channel Television Sound)

Adjust the Sound Settings















  









