Projection Television Users Guide
Initial Setup
31
Auto Tuner Setup
The auto tuner setup function is described on page 23 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
π†
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE or AIR
Press the OK button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or set the channel label as you like or prevent any
unauthorized viewers from watching any or all 181 channels.
Press the MENU button
π†
To CHANNEL SUMMARY
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. You can delete
channels from the scan by removing the “√”. If any channels
were missed during auto tuner setup and you wish to add
them, you may by placing an “√” next to the channel number.
π†
è
To the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
Press the Menu button when finished
AUTO TUNER SETUP
CABLE
PRESS TO START
SELECT OPERATE EXIT
MENU
TUNER MODE
OK
LCT1609 English 3/8/04, 11:02 AM31